|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-11-2019, 03:13 PM | #1 |
Not Yet Wild
Join Date: Mar 2019
Posts: 5
|
2014 ez go rxv
The solenoid seems to be working fine.When i put it in for. or Rev. I get 51vdc to brake.But when I turn it off and have 0 vdc and jack it up I can still move tires easily.Is this normal? I am wondering if throttle positioning sensor might be the issue,because the brake seems to be doing nothing.Although when it does want to go,it also stops fine.Any help would be greatly appreciated.
Thanks, J.Direction |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-11-2019, 04:06 PM | #2 | |
Gone Wild
Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 3,238
|
Re: 2014 ez go rxv
Quote:
Brake is really just a parking brake. The regen braking is slowing you down. If your going fast and push down to far on the brake it will kick the brake on and that's not good. I wonder if some one turned your brake test off? |
|
04-11-2019, 04:31 PM | #3 |
Not Yet Wild
Join Date: Mar 2019
Posts: 5
|
Re: 2014 ez go rxv
How is that done? Through the controller.I have only owned this for 3 weeks,but the problem is getting so bad I am afraid to drive it.I do not own a hand held unit to hook to the controller.
Thanks for your help! |
04-11-2019, 04:40 PM | #4 |
Gone Wild
Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 3,238
|
Re: 2014 ez go rxv
A handheld or a programming station can turn the test off I believe. With you not having any brakes someone must have turned it off. That's the only way it would have passed the start-up that I know of.
|
04-12-2019, 12:57 PM | #5 |
Not Yet Wild
Join Date: Mar 2019
Posts: 5
|
Re: 2014 ez go rxv
cleaned all connectors to brakes and accelerator.Sand every where.This cart must have came from a sandy area.Found plunger switch to be mushy feeling and ohm readings where alittle inconsistent on gas pedal.(ordered new one)
Hooked back up backup buzzer,now everything works most of the time.Guessing computer must need to see the resistance value of the buzzer.Brakes are back to working.Forward and reverse about 85% of the time.Hopefully new plunger switch on gas helps out. Thanks for all your help! |
04-12-2019, 04:23 PM | #6 | |
Gone Insane
Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
|
Re: 2014 ez go rxv
Quote:
Bob |
|
Tags |
wont go sometimes |
|
|
Similar Threads | ||||
Thread | Forum | |||
2014 TXT 48v? | Electric EZGO | |||
2014 RXV? yes or no | Electric EZGO | |||
my new 2014 RXV | Members Rides | |||
2014 efi | Gas Yamaha |