|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
05-13-2019, 02:04 PM
|
#21 |
|
Not Yet Wild
Join Date: May 2019
Posts: 33
|
Re: 2008 RXV inching forward and reverse
is there a reputable retailer that u get parts from ? i dont like buying electrical parts off ebay
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-13-2019, 02:12 PM
|
#22 | |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: 2008 RXV inching forward and reverse
Quote:
|
|
|
|
|
|
05-13-2019, 03:00 PM
|
#23 |
|
Not Yet Wild
Join Date: May 2019
Posts: 33
|
Re: 2008 RXV inching forward and reverse
Ok cool , rear as in opposite of brake i take it ? Ill be ripping into it tonite , just trying to get it all straight . Thanks again for the help. Im sure ill have a few more questions .
|
|
|
|
|
05-13-2019, 05:05 PM
|
#24 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: 2008 RXV inching forward and reverse
No, the cap with the brake on it
|
|
|
|
|
05-13-2019, 06:41 PM
|
#25 |
|
Not Yet Wild
Join Date: May 2019
Posts: 33
|
Re: 2008 RXV inching forward and reverse
Yes i see that now . I have the motor out, and before even took the handicap off, I spawned the motor from the spline side, and I definitely have a bearing out also. So there must be a bearing towards the spline side somewhere inside
|
|
|
|
|
05-13-2019, 06:49 PM
|
#26 |
|
Gone Insane
 Join Date: Oct 2015
Location: TN/NC/GA Tri-state area
Posts: 3,952
|
Re: 2008 RXV inching forward and reverse
That bearing set is on the gear that the motor drives. There is only one bearing in the motor itself
|
|
|
|
|
05-13-2019, 06:55 PM
|
#27 |
|
Not Yet Wild
Join Date: May 2019
Posts: 33
|
Re: 2008 RXV inching forward and reverse
Okay, I see a bearing on the brake side which I assume is the encoder bearing
|
|
|
|
|
05-13-2019, 07:00 PM
|
#28 |
|
Gone Wild
Join Date: Mar 2014
Location: NE Indiana & SW Florida
Posts: 3,235
|
Re: 2008 RXV inching forward and reverse
Bearing Encoder
|
|
|
|
|
05-13-2019, 07:03 PM
|
#29 |
|
Not Yet Wild
Join Date: May 2019
Posts: 33
|
Re: 2008 RXV inching forward and reverse
Yes bearing encoder, so there is another bearing inside?
|
|
|
|
|
05-13-2019, 07:11 PM
|
#30 |
|
Not Yet Wild
Join Date: May 2019
Posts: 33
|
Re: 2008 RXV inching forward and reverse
If there's not another bearing other than the bearing encoder, is the center spline supposed to be sloppy, with plenty of movement?
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 2008 workhorse 1200 with fast forward and reverse only | Gas EZGO | |||
| 2008 rxv won't go forward or reverse | Electric EZGO | |||
| 2008 EZGO TXT Series cart won't move forward or reverse | Electric EZGO | |||
| 2008 Precedent. No reverse, forward erratic | Electric Club Car | |||
| Reverse alarm sounds in Forward, wont go forward or reverse | Electric Club Car | |||
Linear Mode
