01-17-2010, 10:25 AM | #11 |
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,933
|
Re: 2003 clutch photos needed
Here's some pics for you... if you still need them!
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-17-2010, 11:12 PM | #12 |
Not Yet Wild
Join Date: Jan 2010
Location: far north queensland australia
Posts: 9
|
Re: 2003 clutch photos needed
thanks lockman1 ,pics were a great help
it seems theres a metal bush on the primary weight where the pin slots through. on all three primary weights this bush is worn very badly and as specs say there should be no mesureable wear them , im hoping this is the problem. the buttons look good but i may as well replace them also the grating noise it was making was quite noticable so im hoping the new pasts will fix it thanks for everyones help with this and ill let you know how it went when i fit the new parts cheers russell |
01-18-2010, 12:02 AM | #13 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: 2003 clutch photos needed
NICE post Don
|
01-20-2010, 11:02 PM | #14 |
Getting Wild
Join Date: Jun 2008
Location: Gainesville, Ga
Posts: 76
|
Re: 2003 clutch photos needed
It must really be lonely over at the Yamaha site.....I might go over there and give out some bad information.
Bill |
02-13-2010, 07:36 AM | #15 |
Not Yet Wild
Join Date: Jan 2010
Location: far north queensland australia
Posts: 9
|
Re: 2003 clutch photos needed
finally got weights and buttons,installed them only to find that they wernt the problem.now another hire buggy is making the same grinding noise when moving.are there any gearbox bearings etc that could make this noise,buggies run fine except for noise.thanks
|
02-14-2010, 05:05 AM | #16 |
Not Yet Wild
Join Date: Jan 2010
Location: far north queensland australia
Posts: 9
|
Re: 2003 clutch photos needed
well i finally found what was making the noise
the driven clutch rubber bumpers were touching the metal peakes on the other side of the plate. when the clutch engaged they pressed against each other making a horrible grating sound .pulled off clutch and aligned bumpers with valleys on the other side of the plate,no more noise |
|
|
Similar Threads | ||||
Thread | Forum | |||
2003 TXT clutch problem | Gas EZGO | |||
Needed 2003 Gas CC wiring Diagram | Gas Club Car | |||
2003 Used Club Car Winshield Needed Cheap | Golf Carts and Parts | |||
Lightbar install photos needed | Electric EZGO | |||
Clutch info needed Educate me | Gas EZGO |