|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
05-30-2011, 11:38 AM
|
#11 |
|
Not Yet Wild
Join Date: Apr 2011
Location: Mississippi
Posts: 36
|
Re: Bummer, cart broke on Mday
I have not had the cart long. Prev owner said he put a heavy duty solenoid on it, im guessing he thought the 48v would be heavy duty for 36v system. No I have not tried solenoid yet, but with t/s it looks to be ok unless Im doing it wrong.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
05-30-2011, 11:52 AM
|
#12 |
|
Gone Wild
Join Date: Dec 2010
Location: Jax FL
Posts: 598
|
Re: Bummer, cart broke on Mday
Sounds like some type of thermal shut down to me.
|
|
|
|
|
05-30-2011, 01:50 PM
|
#13 |
|
Not Yet Wild
Join Date: Apr 2011
Location: Mississippi
Posts: 36
|
Re: Bummer, cart broke on Mday
Thats what I am thinking. Was talking about the times it has happened with my wife today and found 1 thing in common. Every time it has done it has been at low speeds. Is there anything like a thermal protection in the motor?
|
|
|
|
|
05-30-2011, 02:38 PM
|
#14 |
|
no clue
 Join Date: Sep 2009
Location: spicewood, texas
Posts: 3,308
|
Re: Bummer, cart broke on Mday
still don't know the answer, but there should be a resistor between the to lg terminals on the solenoid, and a diode between the two small terminals. really think the solenoid might be the the prob since it is only getting 3/4 of the normally needed voltage to keep it working. a hd white rodgers 36v, pn 586 is about $65 and a very good unit. i use one on my 48v cart using 36v to activate it.
|
|
|
|
|
05-30-2011, 02:49 PM
|
#15 |
|
The Last Moja Morani
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
Re: Bummer, cart broke on Mday
most of the time the controller will shut down when it gets to hot and when it cools than back on............i would put the right soleniod on the cart just because.................the diode is good or it wouldn,t work at all and the resistor shouldn,t cause that problem......if you do put the right soleniod on make sure you put diode back on in right direction.......the silver band towards positive..............................
 |
|
|
|
|
05-31-2011, 12:38 AM
|
#16 |
|
Not Yet Wild
Join Date: Apr 2011
Location: Mississippi
Posts: 36
|
Re: Bummer, cart broke on Mday
Unless the diode and resistor are made into the solenoid then there isnt either on my cart. Thanks for the feedback. I am gonna put correct solenoid on it. Gonna have to look around to find a parts catolog to get correct part#s for diode and resistor. I bet the guy left the parts off of it, he told me the cart was dcs and its not, no tow switch and no hockey puck for f/r switch.
|
|
|
|
|
05-31-2011, 06:24 AM
|
#17 |
|
no clue
Join Date: Sep 2009
Location: spicewood, texas
Posts: 3,308
|
Re: Bummer, cart broke on Mday
see if this helps. you probably don't have an axe controller, but they are wired the same.
|
|
|
|
|
05-31-2011, 11:13 AM
|
#18 |
|
Not Yet Wild
Join Date: Apr 2011
Location: Mississippi
Posts: 36
|
Re: Bummer, cart broke on Mday
Yea that helps. Everything is wired and set up the same as your diagram except there is not a resistor or diode at solenoid. Dont know how its working.
|
|
|
|
|
| Tags |
| need help, series, txt, will not run |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| bummer no factory lifts for my cart | Lifted Golf Carts | |||
| Broke my own rule, now the cart is busted !! | Electric EZGO | |||
| Broke down and bought a cart today what to do now? | Electric EZGO | |||
| golf cart broke | Electric EZGO | |||
| Broke my 350 | Gas EZGO | |||
Linear Mode
