|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
05-16-2012, 12:13 PM | #1 |
Not Yet Wild
Join Date: Feb 2012
Location: Alabama
Posts: 29
|
Motor Test
How do I by pass the controller with jumper cables to check and see if a motor is good or is it possible to do without damaging anything. I am checking a Yamaha G19 2002 model.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-16-2012, 01:06 PM | #2 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: Motor Test
this will tell you how, when you take the cables off the motor, use two wrenches, and make sure the stud in the motor does NOT spin
http://www.empinc.biz/tech_support.php |
05-17-2012, 10:01 AM | #3 |
Not Yet Wild
Join Date: Feb 2012
Location: Alabama
Posts: 29
|
Re: Motor Test
Thanks, RIB33024 that's exactly what I was looking for.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Motor Test | Electric Club Car | |||
How can I test my motor??? | Electric Club Car | |||
L.v. Motor test | Electric Club Car | |||
Motor test | Electric EZGO | |||
How to test a 48V motor??? | Electric Club Car |