Need Villager 8 Gas Club Car Wiring Diagram

[JackMaintMan]

I'm working on a Villager 8 Club Car and the wiring is messed up due to amateurs like me trying to get it going. At one point the solenoid was stuck on which burned out a few things. I'd love to get a nice clean readable wiring diagram as well as a clear picture of where to set the micro-switches on the cam. I've put a few pictures of the cart at the web address below:

http://fcm.fishersville.net/fcmcarts/

Any help appreciated... By the way, this is super site!

[JackMaintMan]

Found it!.. at the post below. I'm replying to my own post in the event it may be useful to someone else. Thanks to this site I can now see a wiring error on the solenoid where the two smaller red wires are switched on the large posts. I take pictures of everything before and after so at least I know I didn't cause this one... oh well.. I'm heading out to see if I can get it going. http://www.buggiesgonewild.com/gas-c...84-2005-a.html

[ChevyRacing75]

Good luck. Let us know if you get it going.

[JackMaintMan]

It's going aok... Thanks to this Buggiesgonewild forum. I did have to play with the throttle push rod to position the micro-switches on top of the cam before the gully. You can see that in one of the pictures I had posted. It runs great so I guess that's where they are supposed to be. Again.. thanks!