|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-12-2011, 09:23 PM | #1 |
Not Yet Wild
Join Date: Jun 2011
Posts: 4
|
2000ezgo pds fault code 0-0. how do you chk micro switch's
I have a 2000 ezgo pds golf cart. golf cart is inoperative with key "On". installed new controller. New Batteries. In Diagnostic mode there are no fault codes. How do you verify the corrective actions? specifically "Verify micro scitch in Pedal Box. and Verify switch is operational in the Direction Selector Forward. and how do you verify the Key switch is operational?
I am getting very frustrated because I kept putting new parts in the golf cart and I am still having the same problem. Any help or suggestions would be greatly appreciated. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-12-2011, 10:20 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,417
|
Re: 2000ezgo pds fault code 0-0. how do you chk micro switch's
Guessing what is wrong and putting new component after new component in a cart gets expensive and makes the $65 shop tech look cheap.
Obviously your solenoid does not click when you put the key on and press the gas peddle? You will need a digital voltmeter and a basic understanding of how to use it to perform diagnostic tests on the key switch and peddle box micro... It would be the shits to find out all you needed was a $5 micro switch Have you got a meter? |
06-13-2011, 12:33 AM | #3 |
48/400/Alltrax HS motor
Join Date: Jan 2007
Location: Liberty SC, Garden City SC
Posts: 6,190
|
Re: 2000ezgo pds fault code 0-0. how do you chk micro switch's
Scottyb is correct, if you did all that for a micro switch man!
A quick way to find out if it will run is pull the floor up open the box and unhook the micro switch and put a jumper between the 2 wires and see if it runs as in this picture. |
06-13-2011, 09:17 AM | #4 |
Getting Wild
Join Date: Apr 2010
Location: Virginia
Posts: 94
|
Re: 2000ezgo pds fault code 0-0. how do you chk micro switch's
Check pin 5 on Controller with Run/Tow Switch on Run, F-N-R Switch on Forward, and Key On.
Depress Accelerator Pedal. You should have 36volts ( battery string voltage) on pin 5 if micro operates. If not, check switch or wiring to switch. |
06-13-2011, 09:27 AM | #5 | |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,417
|
Re: 2000ezgo pds fault code 0-0. how do you chk micro switch's
Quote:
Put black test lead on the battery pack and probe the pin #5 with the red lead |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
02 ds main dropout fault code | Electric Club Car | |||
EZ-Go charger fault code | Electric EZGO | |||
fault code on EZGO charger | Electric EZGO | |||
Iq fault code??????? | Electric Club Car | |||
Alltrax fault code 5 | Electric EZGO |