ez go rear axle diagram

oneillhm · 06-25-2009, 07:21 PM

I have a '95 Medalist with a Dana axle and I am looking for an exploded parts view of the axle/transmission.

ONY

ruredy · 06-25-2009, 08:33 PM

not sure where this came from but it shows the gears replaced with a HS set.

oneillhm · 06-25-2009, 08:49 PM

Thanx ruredy but I'm looking for parts breakdown. I was driving my cart up hill and there was a pop. When I pulled the motor off I noticed the input shaft wasn't locked in, I am guessing a broken snap ring but may just rebuild the input shaft if I can get all the parts together.

ruredy · 06-26-2009, 06:16 AM

Quote:

Originally Posted by oneillhm

Thanx ruredy but I'm looking for parts breakdown. I was driving my cart up hill and there was a pop. When I pulled the motor off I noticed the input shaft wasn't locked in, I am guessing a broken snap ring but may just rebuild the input shaft if I can get all the parts together.

Ok

divot61 · 06-26-2009, 04:31 PM

are you looking for a breakdown WITH part #'s ?

oneillhm · 06-26-2009, 09:01 PM

That is exactly what I am looking for, again some pieces are missing so i don't know what was where and I want to make sure I order everything I need.

gaston · 06-27-2009, 01:30 PM

Even if you are able to find the parts breakdown, (I have them, if you need them PM me) you wont be able to find particularly separated gears. Gears set are sold completely by EZGO, Dana will tell you to contact them. Try to go with some local EZGO dealer.
Also you can try some of the rebuilt rear-ends, I know a couple of those people that can help on this.
The diagrams here are correct ones for electric.

divot61 · 06-29-2009, 08:21 AM

this will help you out,

http://i634.photobucket.com/albums/u...scan0001-2.jpg

http://i634.photobucket.com/albums/u...scan0002-3.jpg

ruredy, maybe you can add this to the stickys, every little bit helps

sorry there so small, dont know what i did wrong

oneillhm · 06-29-2009, 11:16 AM

Gaston I am looking for parts breakdown for the electric axle with part numbers, I see the gas version but want to make sure the part numbers are correct before ordering. I don't have to replace any of the gears at this point and am just looking for bearings, seals, and c clips. Also who would be the best company these parts from?

ONY

gaston · 06-29-2009, 12:57 PM

Call or visit web site of one of the sponsors, either CartsZone or EastCoastCustom carry the catalog I work with, you'll need:
Bearings 1-6203, 1-6005, 2-6303, 2-6007, I cant remember catalog part # but you can find them at their catalogs with those ones.
You need also the bearings cover or freeze plug catalog part# 6156, 2 of them.
About the C-clip or bearing retainer I see only the input shaft one (top gear) available on the catalog, are those gone from your differential? Usually you can re-use existing ones.
I see also an O-ring rubber seal kit available on the catalog, take a look at this:
https://www.eastcoastcarts.com/catal...27&pNoFilter=1

https://www.cartszone.com/catalog/ca...rchresults.htm

you can even find bearings locally sourced, you will need to look for those

You only you can decide which is the best company, best way to go. I dont want to favor any of the sponsors as all of them carry parts you need, may be you will be looking for the closest one to you

06-25-2009, 07:21 PM	#1
oneillhm Not Yet Wild Join Date: Jun 2009 Posts: 7	ez go rear axle diagram I have a '95 Medalist with a Dana axle and I am looking for an exploded parts view of the axle/transmission. ONY
oneillhm Not Yet Wild Join Date: Jun 2009 Posts: 7

06-25-2009, 08:33 PM	#2
ruredy Born Wild Join Date: Mar 2007 Location: Clover SC. Posts: 5,552	Re: ez go rear axle diagram not sure where this came from but it shows the gears replaced with a HS set.

06-25-2009, 08:49 PM	#3
oneillhm Not Yet Wild Join Date: Jun 2009 Posts: 7	Re: ez go rear axle diagram Thanx ruredy but I'm looking for parts breakdown. I was driving my cart up hill and there was a pop. When I pulled the motor off I noticed the input shaft wasn't locked in, I am guessing a broken snap ring but may just rebuild the input shaft if I can get all the parts together.
oneillhm Not Yet Wild Join Date: Jun 2009 Posts: 7

06-26-2009, 04:31 PM	#5
divot61 Gone Wild Join Date: Apr 2009 Location: indiana Posts: 274	Re: ez go rear axle diagram are you looking for a breakdown WITH part #'s ?

06-26-2009, 09:01 PM	#6
oneillhm Not Yet Wild Join Date: Jun 2009 Posts: 7	Re: ez go rear axle diagram That is exactly what I am looking for, again some pieces are missing so i don't know what was where and I want to make sure I order everything I need.
oneillhm Not Yet Wild Join Date: Jun 2009 Posts: 7

06-27-2009, 01:30 PM	#7
gaston Gone Wild Join Date: Jul 2007 Posts: 829	Re: ez go rear axle diagram Even if you are able to find the parts breakdown, (I have them, if you need them PM me) you wont be able to find particularly separated gears. Gears set are sold completely by EZGO, Dana will tell you to contact them. Try to go with some local EZGO dealer. Also you can try some of the rebuilt rear-ends, I know a couple of those people that can help on this. The diagrams here are correct ones for electric.
gaston Gone Wild Join Date: Jul 2007 Posts: 829

06-29-2009, 08:21 AM	#8
divot61 Gone Wild Join Date: Apr 2009 Location: indiana Posts: 274	Re: ez go rear axle diagram this will help you out, http://i634.photobucket.com/albums/u...scan0001-2.jpg http://i634.photobucket.com/albums/u...scan0002-3.jpg ruredy, maybe you can add this to the stickys, every little bit helps sorry there so small, dont know what i did wrong

06-29-2009, 11:16 AM	#9
oneillhm Not Yet Wild Join Date: Jun 2009 Posts: 7	Re: ez go rear axle diagram Gaston I am looking for parts breakdown for the electric axle with part numbers, I see the gas version but want to make sure the part numbers are correct before ordering. I don't have to replace any of the gears at this point and am just looking for bearings, seals, and c clips. Also who would be the best company these parts from? ONY
oneillhm Not Yet Wild Join Date: Jun 2009 Posts: 7

06-29-2009, 12:57 PM	#10
gaston Gone Wild Join Date: Jul 2007 Posts: 829	Re: ez go rear axle diagram Call or visit web site of one of the sponsors, either CartsZone or EastCoastCustom carry the catalog I work with, you'll need: Bearings 1-6203, 1-6005, 2-6303, 2-6007, I cant remember catalog part # but you can find them at their catalogs with those ones. You need also the bearings cover or freeze plug catalog part# 6156, 2 of them. About the C-clip or bearing retainer I see only the input shaft one (top gear) available on the catalog, are those gone from your differential? Usually you can re-use existing ones. I see also an O-ring rubber seal kit available on the catalog, take a look at this: https://www.eastcoastcarts.com/catal...27&pNoFilter=1 https://www.cartszone.com/catalog/ca...rchresults.htm you can even find bearings locally sourced, you will need to look for those You only you can decide which is the best company, best way to go. I dont want to favor any of the sponsors as all of them carry parts you need, may be you will be looking for the closest one to you
gaston Gone Wild Join Date: Jul 2007 Posts: 829

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
EZGO rear axle exploded diagram	Gas EZGO
??strongest Rear Axle??	Lifted Golf Carts
g14 rear axle help	Gas Yamaha
Rear Axle	Gas EZGO
rear axle removal?	Gas EZGO