|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
12-12-2008, 01:04 AM
|
#1 |
|
Not Yet Wild
Join Date: Oct 2008
Location: West Kentucky
Posts: 9
|
try a different head
I have a yamaha drive with the 357cc engine which is a JR6 same engine thats also in the g22. But one day at work i had a JR6 out of a g22 and a JR3 out of a G16 which is Yamaha's smaller engine and the head on the smaller engine had a smaller combustion chamber and im fixin to try this smaller head on my Drive to hopefully get more compression. While I am at it Iam going to do a little port and polish. So i guess what I am asking is has anyone done this? Does it help? Or is this a bad idea all together?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
03-25-2009, 04:19 PM
|
#2 |
|
Not Yet Wild
Join Date: Feb 2009
Posts: 21
|
Re: try a different head
I am also in a position to put a 301cc head on the 357cc engine
did you try it? any luck? |
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 295cc Head | Golf Carts and Parts | |||
| 295 head on 350CC ? | Gas EZGO | |||
| plaining the head | Gas Yamaha | |||
| Head on 2 stroke | Gas EZGO | |||
Linear Mode
