|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
09-05-2016, 07:22 PM
|
#1 |
|
Not Yet Wild
Join Date: Aug 2016
Posts: 22
|
g16 chassis upgrades
i just picked up a 96 g16 gas. i am gonna be using it around the pits at tractor pulls to carry 4 people, weights, and coolers full of ice. is the stock suspension enough for this? do i want to invest in a lift kit? stiffer springs? Just trying to make sure it will handle the load. Load wont be more then 4 grown men on it at once
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
09-05-2016, 07:30 PM
|
#2 |
|
Gone Wild
Join Date: Mar 2015
Posts: 461
|
Re: g16 chassis upgrades
usually people go with stiffer rear springs, or a collar install on the rear springs
|
|
|
|
|
09-07-2016, 03:30 PM
|
#3 |
|
Searching for The Way
 Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,745
|
Re: g16 chassis upgrades
Stiffer springs will be needed. A lift kit will allow you more ground clearance and the ability to run larger tires.
You will also want to invest in the power train to help with more power. A clone engine or V twin upgrade would be great for that, but a performance secondary clutch might do well with a good running stock engine. Clutch and belt condition will be key. |
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Rolling Chassis | Electric EZGO | |||
| G1 vs G2 chassis | Gas Yamaha | |||
| Indio Chassis ??? | Electric Club Car | |||
| What year is my G1 Gas, chassis says J16- ? | Gas Yamaha | |||
| Chassis Drawings | Design Center | |||
Linear Mode
