|
02-05-2009, 10:30 AM
|
#1 |
|
Taters...
Join Date: Sep 2008
Location: Deep in the heart
Posts: 1,218
|
King pin tube?
Okay, I am installing an axle lift and have the new one on. My question is: the king pin tube is not cooperating with me going back in, so do I just bang the hell out of it till it does go back or am I not doing something that I should be? Also what is that plastic piece under the cowl? Is it just for looks and can I remove it?
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
02-05-2009, 12:06 PM
|
#2 |
|
Gone Wild
 Join Date: Jul 2008
Location: Reddick IL
Posts: 11,278
|
Re: King pin tube?
Matt, I never worked on ez's but two ideas from your pictures. Is the steering maybe binding as you try to insert tube? Maybe try putting the tube in the freezer and warming the spindle bracket. Good luck.
|
|
|
|
|
02-05-2009, 12:12 PM
|
#3 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 74,064
|
Re: King pin tube?
I recently put the same axle in my 2000 workhorse and one side wouldn't fit. I found the powder coating had built up around the edges. You can look for this problem on yours .... if you can feel it with your finger just use a deburring tool to clean it up. I used a a drill press to redrill mine.... but it was all powder coating that came out ..... Good luck.
|
|
|
|
|
02-05-2009, 12:32 PM
|
#4 |
|
Taters...
Join Date: Sep 2008
Location: Deep in the heart
Posts: 1,218
|
Re: King pin tube?
Cool, thanks guys... I will give it a try tonight... Hey scotty, are you happy with the lift and do you happen to have a pic of it on your cart?
|
|
|
|
|
02-05-2009, 01:01 PM
|
#5 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 74,064
|
Re: King pin tube?
I am and I do but not on this computer? Not sure it is same as your's. It is 4 inch lift and 4 inch wider. I put 2 inch wheel spacers in the rear to even out. I like the wider stance.
|
|
|
|
|
02-05-2009, 02:09 PM
|
#6 |
|
Taters...
Join Date: Sep 2008
Location: Deep in the heart
Posts: 1,218
|
Re: King pin tube?
I thought about doing that myself. I still might, just depends how it turns out. I think the wider stance would look cool.
|
|
|
|
|
02-05-2009, 02:13 PM
|
#7 | |
|
Gone Wild
Join Date: Apr 2008
Location: Wichita, KS
Posts: 1,530
|
Re: King pin tube?
Quote:
|
|
|
|
|
|
02-05-2009, 02:18 PM
|
#8 |
|
Taters...
Join Date: Sep 2008
Location: Deep in the heart
Posts: 1,218
|
Re: King pin tube?
Thanks ez, I will probably take that off then.
|
|
|
|
|
02-06-2009, 09:20 AM
|
#9 |
|
Taters...
Join Date: Sep 2008
Location: Deep in the heart
Posts: 1,218
|
Re: King pin tube?
Well I tried to get the tube out when I got home last night and it was in there pretty good. So I decided to go ahead and pound that sucker in till it was down all the way. Thankfully that was all it took. scottyb I got the 5" lift, not sure if it is wider like yours yet. I will definately know by tonight when I get the back finished up. Thanks for all the help guys.
 |
|
|
|
 |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Electra King | Electric golf carts | |||
| Tube Benders | Garage and Workshop | |||
| '91 Marathon ... I can't find the differential fill tube/plug/hole | Electric EZGO | |||
| King Pins | Gas Yamaha | |||
| where to buy Bushings and spindle tube 94 up ? | Gas EZGO | |||
Linear Mode
