![]() |
|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
![]() ![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Getting Wild
![]() Join Date: Apr 2009
Location: San Diego, CA
Posts: 119
|
![]() I am going to be putting in a Kawasaki 440 Motor in my 84 EZGO. Before I pulled the old motor out I failed to measure the distance between the clutches so I could make sure I got the correct belt length.
Any one know how far apart the clutches should be? |
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#2 |
Gone Wild
Join Date: Jan 2008
Location: Lowndes County Ga.
Posts: 343
|
![]() Get the belt you want first then bolt the engine down to fit the length of the belt you have.
|
![]() |
![]() |
![]() |
#3 |
Getting Wild
![]() Join Date: Apr 2009
Location: San Diego, CA
Posts: 119
|
![]() How much slack should the best have at idle?
|
![]() |
![]() |
![]() |
#4 |
Happy Carting
![]() ![]() Join Date: Dec 2007
Location: Southern California
Posts: 74,062
|
![]() pics of ezgo, with new belt .....CLutch was machined so this is a bit tighter than stock....it shifted OK but, you wouldn't want it any tighter..... the new belt has stretched out someand now it shifts fine.
|
![]() |
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
clutches | Gas Club Car | |||
Distance between clutches when using stock belt | Big Block Talk! | |||
clutches | Gas EZGO | |||
Battery overfill/Individual Discharging/Shorter Distance | Electric EZGO | |||
How far is too far ? (distance) | Gas Yamaha |