48v Lithium Battery Monitor Display

[Ronno6]

Is there a special monitor display for my HSKY while operating the cart?
I just have a digital voltage readout that works fine, but voltage is all it displays.

[Tom47]

Originally Posted by Ronno6

Is there a special monitor display for my HSKY while operating the cart?
I just have a digital voltage readout that works fine, but voltage is all it displays.

You need one of these to show amperage, SOC and voltage. I don't know if this one will work with your BB. This is what I got with my ECO kit.
You need to cut a 2-1/8" hole in the dash. I left my old volt meter also and have it hooked to the out put of my voltage reducer so I can read the nominal 12 volts for accessories.

https://ecobattery.com/collections/a...ry-monitor-kit

I see this one also for more $:

https://battlebornbatteries.com/prod...ttery-monitor/

Contact site sponsors to see if any have them. They may be cheaper.

[Tom47]

Ronno,

This one appears to be the same as sold by EB. This one is much cheaper.

https://www.amazon.com/LNEX-Voltmete...980110&sr=8-39

[Ronno6]

Originally Posted by Tom47

Ronno,

This one appears to be the same as sold by EB. This one is much cheaper.

https://www.amazon.com/LNEX-Voltmete...980110&sr=8-39

Like a game of "Can you spot the differences?"
The set button is different
The ECO unit is good to 350A
The Amazon model is available in 2 ranges: 159A and 500A

I would think I should get the 500A model??

Tanks,Mr. Tom!

Do a search on the bay for:

Wireless Battery Monitor Meter DC 120V 300A VOLT AMP AH SOC Remaining Capacity

and tell me what you think of those... I woulda pasted a link but they were 5 miles ling and I didn't want to use up the forum's space...

[dc.901]

This is the one I got because it comes with long enough cable to go from battery compartment all the way to dash...
https://www.amazon.com/QWORK-Battery...8982419&sr=8-5

For 1st couple of weeks I used to go out with my multimeter and compare. It has been accurate so far...

What is the max current draw for your HSKY battery?

[dc.901]

Originally Posted by dc.901

This is the one I got because it comes with long enough cable to go from battery compartment all the way to dash...
https://www.amazon.com/QWORK-Battery...8982419&sr=8-5

For 1st couple of weeks I used to go out with my multimeter and compare. It has been accurate so far...

What is the max current draw for your HSKY battery?

Full disclosure - install instructions were too tiny for my eyes.
So, I watched this video which helped.
https://www.youtube.com/watch?v=2hD5XoKqMFo

[Ronno6]

48v HSKY Max current draw 350A for 6 seconds.

[Tom47]

Originally Posted by Ronno6

48v HSKY Max current draw 350A for 6 seconds.

Get the 500 amp one which is only a few $ more. That will work for you. It's the same one dc.901 has and it works for him.

I would forget the wireless one. It can't be as accurate at the wired one. you just need to run the small cable from the shunt on the battery negative to the meter in the dash.

[Ronno6]

Originally Posted by Tom47

I would forget the wireless one. It can't be as accurate at the wired one. you just need to run the small cable from the shunt on the battery negative to the meter in the dash.

Forget which one ????

[Tom47]

Originally Posted by Ronno6

Forget which one ????

This one you mentioned:

Wireless Battery Monitor Meter DC 120V 300A VOLT AMP AH SOC Remaining Capacity