|
|
|||||||
| Big Block Talk! Everything about swapping a big block engine into your cart! |
  |
|
|
Thread Tools | Display Modes |
10-01-2009, 08:38 PM
|
#1 |
|
Not Yet Wild
Join Date: Sep 2009
Posts: 23
|
Rear end pulley on wrong side
Attempting to put a 440 in a 93 club car. The engine shaft is on the left side and the rear end is on the right side. Is it as easy as just floppin the rear end or is there alot more to it.
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
10-01-2009, 08:41 PM
|
#2 |
|
Gone Wild
 Join Date: Mar 2008
Location: Rockwall, Texas (Dallas / Ft. Worth)
Posts: 7,077
|
Re: Rear end pulley on wrong side
No - There's more to it. Better find a different motor...
|
|
|
|
|
|
|
|
10-01-2009, 08:45 PM
|
#3 |
|
Not Yet Wild
Join Date: Sep 2009
Posts: 23
|
Re: Rear end pulley on wrong side
ok or would i be better off to find a different rear end that will be on the driver side
|
|
|
|
|
10-01-2009, 08:49 PM
|
#4 |
|
Gone Wild
Join Date: Mar 2008
Location: Rockwall, Texas (Dallas / Ft. Worth)
Posts: 7,077
|
Re: Rear end pulley on wrong side
Do whatever is easier! Sounds like you're going to spend some good $$$ just to use the 440 though...
|
|
|
|
|
|
|
|
10-01-2009, 08:57 PM
|
#5 |
|
Not Yet Wild
Join Date: Sep 2009
Posts: 23
|
Re: Rear end pulley on wrong side
ok i will have to see if i can find a different engine but i think all snowmobile engines come out the left side.
|
|
|
|
|
10-01-2009, 09:18 PM
|
#6 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 74,073
|
Re: Rear end pulley on wrong side
Any 4 stroke motor will match right up to a '93
 |
|
|
|
|
10-01-2009, 09:22 PM
|
#7 |
|
Gone Wild
Join Date: Mar 2008
Location: Rockwall, Texas (Dallas / Ft. Worth)
Posts: 7,077
|
Re: Rear end pulley on wrong side
I get confused with right and left. It's 100% fool proof if you say Drivers side or Passengers side to avoid confusion.
|
|
|
|
|
|
|
|
10-01-2009, 09:27 PM
|
#8 |
|
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 74,073
|
Re: Rear end pulley on wrong side
CC= passenger side and for you Ezgo dealers Ezgo is on the driver's side
 |
|
|
|
|
10-01-2009, 09:28 PM
|
#9 | |
|
Gone Wild
Join Date: Mar 2008
Location: Rockwall, Texas (Dallas / Ft. Worth)
Posts: 7,077
|
Re: Rear end pulley on wrong side
Quote:
|
|
|
|
||
|
|
|
|
10-02-2009, 10:05 AM
|
#10 |
|
Not Yet Wild
Join Date: Sep 2009
Posts: 23
|
Re: Rear end pulley on wrong side
can i swap the rear end with one from an ezgo to switch the clutch to the driver side
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| removing the drive pulley from rear end. | Gas EZGO | |||
| Rear end noises-primarily on left side | Gas EZGO | |||
| remove pass.side rear axle | Electric EZGO | |||
| 1980 G1 rear drive pulley play | Gas Yamaha | |||
| Changing rear driver side axle. | Gas EZGO | |||
Linear Mode
