![]() |
|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
![]() ![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Gone Wild
Join Date: Dec 2007
Location: lake county FL
Posts: 327
|
![]() i was looking for a jet on CCPs site and could not find a match for my G14. Will one of the jets that fit another model also fit mine. If i get the jet and a K&N will i need to do something about my muffler? Doesn't the saying go: the more air you have coming in, the more you need going out?
|
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#2 |
Admin/Moderator
![]() ![]() Join Date: Dec 2006
Location: Ohio
Posts: 18,135
|
![]() CPP has a lot more than they show on the website. Give Tom a call, he will
have what you need. I believe he is just finishing the testing of a new hop-up kit for Yamahas. It will have a new carb jet, K&N air filter and complete exhaust. |
Ron
![]() PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
![]() |
![]() |
![]() |
#3 |
Gone Wild
Join Date: Dec 2007
Location: lake county FL
Posts: 327
|
![]() Excellent!!! thanks Ron
![]() |
![]() |
![]() |
![]() |
#4 |
Gone Wild
Join Date: Nov 2007
Posts: 469
|
![]() Same jet as a g9 for k&n .042" + or -
I drill my own using a digital micrometer & a set of drill bit to clean out torch tips Just go slow no turning back you have to buy a stock jet & start over (if you choose to do it yourself) Good Luck |
![]() |
![]() |
![]() |
#5 |
Gone Wild
Join Date: Dec 2007
Location: lake county FL
Posts: 327
|
![]() apprieciated CDG....
|
![]() |
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
wtb used g2/g9 carb | Golf Carts and Parts | |||
Carb Help... | Gas Yamaha | |||
carb jetting | Gas Yamaha | |||
Carb Rebuild g9 | Gas Yamaha | |||
carb | Big Block Talk! |