![]() |
|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
![]() ![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Gone Wild
![]() ![]() Join Date: May 2010
Location: Houston, TX
Posts: 203
|
![]() seems to be running on the wrong side of the ramps I just installed the plowmans clutch it has been running great and then yesterday it started acting up
Sent from my PC36100 using Tapatalk 2 |
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#2 |
Gone Wild
![]() Join Date: Feb 2011
Location: Winnipeg, Manitoba
Posts: 177
|
![]() Did you lubricate the secondary clutch bushing when you reassembled it? Try to lubricate the ends of the spring as well.
|
![]() |
![]() |
![]() |
#3 |
Gone Wild
![]() ![]() Join Date: May 2010
Location: Houston, TX
Posts: 203
|
![]() I did lube the shaft and the bushing when I putit together as well Asa few pumps in the grease sert as well. I called Plowmans and sent them pictures but have not heard back from them
|
![]() |
![]() |
![]() |
#4 |
Gone Wild
![]() ![]() Join Date: May 2010
Location: Houston, TX
Posts: 203
|
![]() Yes its using the back side of the ramp
|
![]() |
![]() |
![]() |
#5 |
Gone Wild
![]() Join Date: Jun 2009
Location: ozarks
Posts: 237
|
![]() i don't see how it could , your engine only turns one way, and the pullys only turn one way , i think it's just "unwinding"
mabey i'm wrong, someone correct me if i am |
![]() |
![]() |
![]() |
#6 |
Gone Wild
![]() Join Date: Jan 2010
Location: Lakeview, Ohio
Posts: 261
|
![]() It looks correct to me! unless your engine is turning the wrong way.
|
![]() |
![]() |
![]() |
#7 |
Gone Wild
![]() Join Date: Jan 2010
Location: Lakeview, Ohio
Posts: 261
|
![]() I looked at your pictures again. It looks like the spring turns it back towards the opposite side of the hub when it's not running. When you turn the engine over it should pull to the rubber snubs which is correct, unless I'm missing something.
|
![]() |
![]() |
![]() |
#8 |
Gone Wild
![]() ![]() Join Date: Jul 2008
Location: Reddick IL
Posts: 11,280
|
![]() Your wear buttons on the ramps are worn away gone, FIX NOW or buy a bunch of parts.
Does the spring have tangs on the end if so you may have pre wraped the wrong way when assembled. |
![]() |
![]() |
![]() |
#9 |
Not Yet Wild
![]() Join Date: Mar 2012
Location: Texas
Posts: 1
|
![]() I have to ask, is the clutch sheave moving when the engine gets up to speed?
|
![]() |
![]() |
![]() |
#10 |
Not Yet Wild
![]() Join Date: Oct 2010
Location: Mount Zion, Ontario
Posts: 33
|
![]() I am just trying to replace my rear clutch (from Plowman's too). Taking a break from trying to get that spring compressed. Dooms.. the spring does not have any tangs, it is flat at both ends. I'll take your advise and replace my shoe ramps while it is apart.
Sorry I can't help you Ray & Lori |
![]() |
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
Rear clutch issue g14 | Gas Yamaha | |||
Clutch issue. | Gas EZGO | |||
95 TXT clutch issue | Gas EZGO | |||
g8 clutch issue | Gas Yamaha | |||
Clutch Issue- need help | Big Block Talk! |