|
03-11-2007, 09:30 PM
|
#1 |
|
Gone Wild
Join Date: Dec 2006
Location: Halifax, Pa
Posts: 208
|
roof ???
ok, went to put the roof back on the cart and cant find a bolt to fit the hole in the front cowl??? metal is threaded so theres no nut, but does anyone no the kinda bolt i need, went through every bolt here and cant find one to fit, lol
 |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
03-11-2007, 09:41 PM
|
#2 |
|
Getting Wild
Join Date: Jan 2007
Location: Mechanicsville, Virginia
Posts: 85
|
If I remember correctly the bolts that you are talking about are 5/16-18 UNC
|
|
|
|
|
03-11-2007, 09:47 PM
|
#3 |
|
Gone Wild
Join Date: Dec 2006
Location: Halifax, Pa
Posts: 208
|
k thanks, ill make a trip to the hardware store tomorow and check (and im takin the cart on the trailer so i dont need to make 50 trips back and forth in case) lol
|
|
|
|
|
03-11-2007, 09:53 PM
|
#4 |
|
Getting Wild
Join Date: Jan 2007
Location: Mechanicsville, Virginia
Posts: 85
|
I just walked out to the shop and checked and yes mine are 5/16-18 and are about 1" long. You may want to spray some WD-40 or something into the bolt holes and run a tap down by hand to remove any dirt or trash from the threads. Hope this helps....
|
|
|
|
Linear Mode
