|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
03-04-2017, 11:37 PM
|
#1 |
|
Not Yet Wild
Join Date: Jan 2017
Location: San Antonio, TX
Posts: 71
|
Wheels binding
Noticed when I was switching out my rear drum brakes for the Ausco disc brakes that the drums were dragging...well I thought it was the brakes that were dragging. Then I removed the brakes and the cables from the mounts. I tried spinning the spline, thinking it would move easily, but it would give then bind a little(like rubbing) and then give again. I've since switched the brake system, and before I even attached the rotor or brake cables, it was still binding slightly, so I know it's not the brakes grabbing prematurely. Any ideas what could cause this?? Thanks in advance!
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
| Tags |
| ezgo troubleshooting |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Clutch binding up | Gas Yamaha | |||
| Throttle pedal binding | Gas Club Car | |||
| G1 front end binding | Gas Yamaha | |||
| 88 gas is binding up when going forward | Gas Club Car | |||
Linear Mode
