|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
11-11-2019, 09:56 PM | #1 |
Gone Wild
Join Date: Apr 2019
Location: Baton Rouge, LA
Posts: 204
|
one more bit of help to wire switch panel
I have a Yamaha Drive with headlight and taillight kit from Madjax.
I have 2 small LEDs in my front brushguard. I have a Scotty B 30a reducer and fuse panel/ buss bar coming tomorrow. I have the switch panel in the photo. Im confused on how to wire the lights to the switch. My lights pos/neg will go to the fuse panel and buss bar. However on my switch end of the light wiring harness i have a pos , neg, and load wire. On the switch panel on each switch there is only room for the load wire. Where do i put the other pos and neg wires, do i route them to the fuse panel as well? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Rocker Switch Panel | Electric EZGO | |||
G1 Stainless Switch Panel | Design Center | |||
DIY Accessory switch panel? | Electric EZGO | |||
How do I remove the key switch panel? | Electric EZGO | |||
How do I access switch panel? | Electric EZGO |