09-26-2010, 09:24 PM | #11 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: very weak spark
I just told you.... Kill wire to ignitor, to coil.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-26-2010, 10:39 PM | #12 |
Gone Wild
Join Date: Apr 2010
Posts: 172
|
Re: very weak spark
confused sorry mine the ignitor is with the coil........i failed to say that it is a later 96. it still spins counter clockwise.
|
09-28-2010, 11:34 PM | #13 |
revolutiongolfcars.com
Join Date: Mar 2010
Location: Golf Car Capital of The World... Augusta, Georgia
Posts: 10,224
|
Re: very weak spark
Ok that's even easier then. Run the kill wire straight to the coil and not to the limiter at all
|
09-29-2010, 11:00 PM | #14 |
Gone Wild
Join Date: Apr 2010
Posts: 172
|
Re: very weak spark
i am still not getting what you guys are getting at here there is one wire running down to limitor. ok what wire do i run up to the ignitor then? well anyways they put a new coil on and it starts like it should now.........
|
09-29-2010, 11:30 PM | #15 | |
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,900
|
Re: very weak spark
Quote:
It just goes to show ya' that even NEW parts can be bad from the box! Now... say "thank you" to those that tried to help! |
|
09-30-2010, 06:22 AM | #16 |
Gone Wild
Join Date: Apr 2010
Posts: 172
|
Re: very weak spark
i still want to know about bypassing the limitor/......but anyways thanks everyone
|
09-30-2010, 06:59 AM | #17 |
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,900
|
Re: very weak spark
O.K.... look at the pic... #22 is your rev limiter that you "snipped" the ground on, find, and "snip" the other wire coming out of it, tape both ends up, and it's completely out of the loop! I, personally don't like the idea of "cutting" wires, and IMO, just removing the ground should be good enough, (it just makes it that much harder to hook back up in the event you want it hooked back up!) Disclaimer: I... anyone on this forum, or... BGW itself, is/are NOT responsible for your actions in the result of using, or, misusing this information that may cause possible damage to yourself, your property, or someone else! |
09-30-2010, 11:07 PM | #18 |
Gone Wild
Join Date: Apr 2010
Posts: 172
|
Re: very weak spark
so the wire in between 4 and 14 i know exactly what you are talking about now.......actually if i were to get a new rpm limitor it should have that wiring on it......am i right or wrong here???
|
10-01-2010, 12:19 AM | #19 | |
Gone Crazy
Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 6,021
|
Re: very weak spark
Quote:
"Return it to where you got it repaired and politely ask them to fix it." Glad you got it worked out. |
|
10-01-2010, 07:09 AM | #20 | |
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,900
|
Re: very weak spark
Quote:
but it's not a $20.00 part, it's to my understanding they cost around $200.00, if you know for sure yours is bad, then do what you have to do to bypass it, or get a new one. but, If your cart is running like it should now because of a bad coil, why cut the wire on your existing good limiter, then later, spend a good chunk of money on a new one? If the limiter is good, leave it alone... if it's bad, do what you have to do... my .02 |
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
weak spark | Gas EZGO | |||
99 ez go weak spark | Gas EZGO | |||
1984 will not run / weak spark | Gas Club Car | |||
weak spark. What causes this | Gas EZGO | |||
Weak Spark | Gas EZGO |