|
Gas Club Car Gas DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
06-07-2008, 10:02 AM | #11 |
Not Yet Wild
Join Date: Jun 2008
Posts: 12
|
Re: bore & hone, new piston/rings..HELP!!!!!
Ok folks.....I'm getting there. Trial and error baby! Does anyone know what sort of compression this engine should be at? I should have good news for everyone in abut 5 minutes....God I hope.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-07-2008, 12:31 PM | #12 |
Not Yet Wild
Join Date: Jun 2008
Posts: 12
|
Re: bore & hone, new piston/rings..HELP!!!!!
does anyone know the brand or maker of this 341cc flat head? Again, this is ina 1986 Club Car. My machinest will look up all specs if we can find that info.
|
06-07-2008, 12:47 PM | #13 |
nimda
Join Date: Jun 2007
Posts: 13,022
|
Re: bore & hone, new piston/rings..HELP!!!!!
Kawasaki.
|
06-07-2008, 01:03 PM | #14 |
Not Yet Wild
Join Date: Jun 2008
Posts: 12
|
Re: bore & hone, new piston/rings..HELP!!!!!
this is the kf82 correct?
|
06-07-2008, 01:35 PM | #15 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: bore & hone, new piston/rings..HELP!!!!!
I have a large kawasaki repair manual. I can't find the model # u gave.
You may be interested to know the valve adjustment is the same for all of the adjustable valve engines that I see listed. Think you'd be safe with that. Cold adjustment is: 0.12 mm 0.0047 inch |
06-07-2008, 03:52 PM | #16 |
Not Yet Wild
Join Date: Jun 2008
Posts: 12
|
Re: bore & hone, new piston/rings..HELP!!!!!
My cart is running great....a bit hot but I think I need to adjest the carb now. I cannot thank everyone enough. My project would have stumped me if it wasnt for this site. Thanks for the specs on the valves!!! She's a little smokey right now, but I think it's the engine burning of excess oil etc.
|
06-07-2008, 05:09 PM | #17 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: bore & hone, new piston/rings..HELP!!!!!
Besure to readjust those valves (COLD) often until everything is broke in. Glad to have helped.
|
06-07-2008, 08:20 PM | #18 |
Not Yet Wild
Join Date: Jun 2008
Posts: 12
|
Re: bore & hone, new piston/rings..HELP!!!!!
Thanks ScottyB...I'm not sure I know how to adjust the valves at all. The engine is running pretty hot and smells & looks a little smokey....tried to adjust fuel air screw but that didnt help. I'm happy it's running at all, but want to dial it in to make her purrrr. Any thoughts?
|
06-07-2008, 09:02 PM | #19 |
Gone Wild
Join Date: Sep 2007
Location: maine
Posts: 3,352
|
Re: bore & hone, new piston/rings..HELP!!!!!
you need to adjust them valves like scottyB said. if you just rebuilt that motor then it will purrrr like you want if you don't you will end up damaging the new motor...
|
06-07-2008, 10:20 PM | #20 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: bore & hone, new piston/rings..HELP!!!!!
I'm sure step by step directions are in here.......This is one of the stickies at the top of this Section pertaining to the carts in this section.....See how cool that works?
http://www.buggiesgonewild.com/gas-c...-ds-carts.html |
|
|
Similar Threads | ||||
Thread | Forum | |||
Comet 1190 1 1/8" Bore Drive Clutch 4 Big Block on Ebay $390 | Golf Carts and Parts | |||
295 engine rings | Gas EZGO |