G1 oil pump houseing

[makobuggie]

Hello, im rebuilding my g1, everything is going to be new on it,im trying to get the set screw out of the houseing on it, i tried soaking it with wd for 2 days and no luck, and liqide wrench, i tried a impact screwdriver, no luck,i might just leave it,now the head is stripped, i dont think it does to much,any ideas? And i broke a easy out in it to.

[nwarren9]

Try this go to you local automotive parts shop and ask for a left hand drill bit just a little smaller than the shank of your screw you want to remove. I have removed several bolts with broken heads an strip heads using left hand bits when a easyout would brake off.the trick is getting the right size bit and use a center punch to set center. But nothing is a 100%

[makobuggie]

Originally Posted by nwarren9

Try this go to you local automotive parts shop and ask for a left hand drill bit just a little smaller than the shank of your screw you want to remove. I have removed several bolts with broken heads an strip heads using left hand bits when a easyout would brake off.the trick is getting the right size bit and use a center punch to set center. But nothing is a 100%

hello, i used a easy out, with left bit, but the easy out broke in it, the pc is in there,wont move, i have to just leave it in there, thanks for the reply.