|
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
04-21-2008, 10:53 PM | #1 |
Not Yet Wild
Join Date: Apr 2008
Posts: 8
|
Creepiing in forward and reversre
I just got the solenoids hooked up on my G1. It works find now but for some reason it without moving the throttle. Maybe I have a wire crossed?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-21-2008, 10:55 PM | #2 |
Not Yet Wild
Join Date: Apr 2008
Posts: 8
|
Re: Creepiing in forward and reversre
I mean the dang creeps in reverse and forward. Not real fast just enough the make the cart move. Sticky switch maybe?
|
04-22-2008, 12:09 PM | #3 |
nimda
Join Date: Jun 2007
Posts: 13,022
|
Re: Creepiing in forward and reversre
The throttle is not fully disengaging. Look at your wiper contacts. you may be able to adjust it.
|
06-08-2009, 06:13 PM | #4 |
Not Yet Wild
Join Date: Apr 2008
Posts: 8
|
Re: Creepiing in forward and reversre
You know i pulled the wiper clear away from the board and it still does it. The relays are showing 16 volts and the shouldnt be showin any thing. It does it in both directions and im confused. I checked both relays and there fine. I need some advice!!
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
goes back not forward | Electric EZGO | |||
Mid 90 EZGO will reverse but not go forward | Electric EZGO | |||
Forward Neutral Reverse Switch | Gas Club Car | |||
No forward | Electric EZGO |