|
Hunting and Fishing Post all your hunting and fishing experiences here. |
|
Thread Tools | Display Modes |
03-09-2024, 03:40 PM | #1 |
WARRANTY VOID
Join Date: Aug 2021
Posts: 3,314
|
Electric trolling motors
Electric trolling motors like Minn Kota, specifically the basic ones with brushed DC motors, the speed control is a set of 5 fixed speeds as you twist the handle. Has anyone taken one apart?
I'm curious how simple the mechanism is, or if it's actually a speed controller with little electronics in there. Goal being, can I give it more volts and expect it to run or will I just smoke the handle. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-10-2024, 05:08 AM | #2 |
Gone Wild
Join Date: Oct 2012
Location: Southwestern Pa.
Posts: 6,366
|
Re: Electric trolling motors
I would (thinking out loud) think the wiring and circuitry is built to handle 12V. Pushing up the voltage to say 24V may juice up your power, but there's likely a "weak link" in the factory setup that's not going to handle a double voltage for all that long.
I could be wrong.....but that's my guess. |
03-10-2024, 09:49 AM | #3 |
WARRANTY VOID
Join Date: Aug 2021
Posts: 3,314
|
Re: Electric trolling motors
https://lakesidemarineandservice.com...sembly-2774037
I think so too. There is a controller board in there and it has some relays, cap, and what looks like a power FET on a heatsink. I imagine it's controlling speed by PWM of the motor. Without thoroughly analyzing the board I won't know if all the components could handle higher voltage, that said I could probably find an off the shelf DC motor speed controller and Macgyver that in. |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Rebuilding electric motors | Extreme DC! | |||
Aftermarket electric motors | Electric EZGO | |||
performance electric motors | Electric Club Car |