500amp series controller+ programmer for under $200

[stephen.hayne]

calling auggiedoggy or kgsc... if you could have a look at this post and see if you have some ideas? I think the controller is good, but maybe not??

BTW, I don't have an old windows laptop lying around, but I will get one if that is what I really gotta do.

https://buggiesgonewild.com/showthread.php?t=198322

[augiedoggy]

What are you asking specifically? If it's a 1205 controller you can program them for different throttles including the ITS

[kgsc]

Ditto

[stephen.hayne]

Originally Posted by augiedoggy

What are you asking specifically? If it's a 1205 controller you can program them for different throttles including the ITS

Originally Posted by kgsc

Ditto

I was asking about other diagnostic things to try. I don't have a controller programmer (I bought the bits, but don't have a Windows laptop and there are NO programmer types willing to help near where I live in Fort Collins, CO).

I hooked up the LED test, and the blinking pattern says the controller is "ok", yet it won't recognize the throttles - eBay seller says it is programmed for 0-5kohm...

So, I am returning it. I'll try again with another 1205 or maybe an AllTtrax.

Thanks,
Stephen