Adding brake lights to 2021 Precedent

Steve2468 · 01-14-2023, 07:43 PM

Cart has factory pre-wired lights so I added an upgrade light kit. Plugged in to the 9 pin connector and in no time I had turn signals and a horn BUT the brake light wiring is kicking my butt. All directions online say I should find a red, brown and black wire under the mat by the pedal. The red should have 12V power. In mine I found a brown male and red female. there is also a red/white stripe and brown attached to a weird connector. None have power. Anyone have experience with this?

Jeff McGuire · 01-24-2023, 11:23 AM

You will probably need to add the brake light relay under the front hood. If your doing LED tail lights you are OK to just jump the wire across because the LED don't require much amperage.

01-24-2023, 11:23 AM	#2
Jeff McGuire Gone Wild Join Date: Jul 2019 Location: Katy TX Posts: 162	Re: Adding brake lights to 2021 Precedent You will probably need to add the brake light relay under the front hood. If your doing LED tail lights you are OK to just jump the wire across because the LED don't require much amperage.

Similar Threads
Thread	Forum
Adding Brake Lights to Factory TXT lights	Electric EZGO
Adding Brake lights and blinkers to existing lights	Electric Club Car
Adding brake lights	Electric EZGO
Adding brake lights to an E-Z-Go	Design Center
Adding brake lights to a Drive/G29?	Electric Yamaha

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum