lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV.



Post New Thread  Reply
 
Thread Tools Display Modes
Old 08-16-2016, 11:16 PM   #1
techno89
Not Yet Wild
 
Join Date: Aug 2010
Posts: 25
Default Going from 4 buss bar to 3 buss bar controller question

What exactly am I going to be doing with the extra wire?

I've heard something about it going right from the FnR to the motor, but which post on the FnR (if thats right) or is it something else completely?

I ordered the 350a Curtis 1206 upgraded model, and it has 3 bars vs my current that has 4.

Thanks!
techno89 is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 08-16-2016, 11:31 PM   #2
scottyb
Happy Carting
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 73,356
Default Re: Going from 4 buss bar to 3 buss bar controller question

If you have the 4 blade diagram, imagine the A2 controller blade does not exist and the motor A2 and controller 12 O'clock cable just join up to make a single run from the F&R to the motor.
scottyb is offline   Reply With Quote
Old 08-17-2016, 07:40 AM   #3
rabbitreborn
Gone Wild
 
rabbitreborn's Avatar
E-Z-GO
 
Join Date: Jun 2010
Location: Central Florida
Posts: 2,757
Default Re: Going from 4 buss bar to 3 buss bar controller question

depending on the cart, most of them had the wire running from the A2 on the controller to the F&R, then another wire going from the F&R to the A2 on the motor. If that is the case, just eliminate the wire from the controller to the F&R.

Alternate designs had the wire running from the F&R to the A@ on the controller, then a separate wire running from the A@ on the controller to the A@ on the motor. In this case, you move the wire running from the F&R to the controller to run from the F&R directly to the motor and eliminate the extra wire.
rabbitreborn is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric EZGO


Thread Tools
Display Modes


Similar Threads
Thread Forum
99 TXT reducer/buss/fuse location? Electric EZGO
98 dcs controller question ? Electric EZGO
F/R switch beef up buss bars Electric EZGO
PDS Controller Question Electric EZGO
alltrax buss fuse Golf Carts and Parts


All times are GMT -5. The time now is 07:18 AM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.