|
10-25-2017, 04:19 PM
|
#31 |
|
Gone Wild
Join Date: Jun 2015
Location: NW Iowa
Posts: 1,669
|
Re: 2007 ST350 won't fire
Yup any bolt that's smaller than your clutch bolt will work just chop off the head as stated
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
10-25-2017, 11:32 PM
|
#32 |
|
British born Nincompoop
 Join Date: Feb 2007
Location: United Kingdom
Posts: 2,463
|
Re: 2007 ST350 won't fire
Or as i said, fill the void with grease and run the bolt in with an impact.
|
|
|
|
|
10-26-2017, 07:00 AM
|
#33 |
|
Gone Wild
Join Date: Jun 2012
Location: Houston
Posts: 544
|
Re: 2007 ST350 won't fire
Planning to give this a go this evening after work
|
|
|
|
|
10-26-2017, 08:11 AM
|
#34 |
|
Gone Wild
Join Date: Jun 2012
Location: Houston
Posts: 544
|
Re: 2007 ST350 won't fire
Sure doesn't seem like there is a whole lot of room between the frame and the bolt to get an impact in there
|
|
|
|
|
10-26-2017, 08:17 AM
|
#35 |
|
British born Nincompoop
Join Date: Feb 2007
Location: United Kingdom
Posts: 2,463
|
Re: 2007 ST350 won't fire
If i recall, my impact just fitted in, It was a compact snap on 1/2 inch drive.
|
|
|
|
|
10-26-2017, 08:36 AM
|
#36 |
|
Gone Wild
Join Date: Jun 2012
Location: Houston
Posts: 544
|
Re: 2007 ST350 won't fire
Yea I was figuring it would have to be a compact just looking at the distance
|
|
|
|
|
10-26-2017, 10:13 AM
|
#37 |
|
Gone Wild
Join Date: Jun 2015
Location: NW Iowa
Posts: 1,669
|
Re: 2007 ST350 won't fire
Last time I did a txt I took a ratchet strap and went around drivers side leaf spring and frame and compressed it this allowed me to sneak in a socket with an extension through the front of the wheel well with impact on the out side of the cart not sure if it will work on yours but it's worth a shot
|
|
|
|
|
10-28-2017, 01:01 PM
|
#38 |
|
Gone Wild
Join Date: Jun 2012
Location: Houston
Posts: 544
|
Re: 2007 ST350 won't fire
Had some things come up the last 2 days and never got a chance. Attempting this today, but man is this a tight squeeze!
|
|
|
|
|
10-28-2017, 01:52 PM
|
#39 |
|
Test before replacing
Join Date: Aug 2013
Location: Ohio side of the Pennsylvania border.
Posts: 3,496
|
Re: 2007 ST350 won't fire
Even if you get the bolt out,, and manage to pop the clutch from the taper, it doesn't look like there is room to slide the clutch off the shaft.
|
|
|
|
|
10-28-2017, 01:53 PM
|
#40 |
|
Gone Wild
Join Date: Jun 2012
Location: Houston
Posts: 544
|
Re: 2007 ST350 won't fire
Well I've managed to just barely get access but guess my impact/compressor combo isn't strong enough because I can't get it to break the bolt free. Drive clutch just starts to spin. Tried spraying some PB Blaster on it too
|
|
|
|
 |
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Lowering st350 | Gas EZGO | |||
| Few Pics Of My ST350 | Lifted Golf Carts | |||
| 2007 ezgo st350 hard starting when hot | Gas EZGO | |||
| 2004 ST350 Not Running, gas and spark but no fire | Gas EZGO | |||
| Ez-go st350 camo | Gas EZGO | |||
Linear Mode
