|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
10-03-2020, 12:44 PM | #11 |
Not Yet Wild
Join Date: Jul 2019
Location: The Villages, FL
Posts: 55
|
Re: High idle air/fuel mixture screw
I finally got around to changing the fuel filter. It didn't look dirty and was supposedly changed on the last service but I think that was a major part of the problem. I now only have hesitation on the first start of the day for about 2 seconds. The rest of the day it runs perfectly. I also removed the fuel pump and blew some carb cleaner into the inlets. I was going to open the pump to clean but couldn't figure out the process.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-03-2020, 02:57 PM | #12 | |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,441
|
Re: High idle air/fuel mixture screw
Quote:
https://www.buggiesgonewild.com/showthread.php?t=13589 |
|
10-03-2020, 06:04 PM | #13 |
Not Yet Wild
Join Date: Jul 2019
Location: The Villages, FL
Posts: 55
|
Re: High idle air/fuel mixture screw
It is a Mikuni but it looks like the attached, so there was no easy screw offs. Thanks for all the information, I really appreciate the help. I would have been almost completely lost if it wasn't for this site, as I'm not that knowledgeable or mechanically inclined.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
VC tuned carb idle mixture screw adjustment | Clone Engine Swaps | |||
brass plug over idle mixture screw 420cc predator | Clone Engine Swaps | |||
Tilotson mixture screw setting | Gas Harley Davidson | |||
ISO Carb Mixture screw | Golf Carts and Parts | |||
Lost mixture screw! | Gas EZGO |