|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
10-05-2020, 01:23 PM | #1 |
Not Yet Wild
Join Date: Aug 2020
Location: MI
Posts: 2
|
G16 with Rhox 6" Lift
I just completed installing a 6" Rhox lift on my new cart and now the rear axle is offset towards the drivers side by about an inch. I'm not sure if the sway bar needs to be relocated in the drop bracket or if I did something wrong during install. Their directions were terrible, so it's possible that I missed something.
Any ideas of what might be causing the shift in the rear-end would be much appreciated. thanks joe |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-05-2020, 03:32 PM | #2 |
maintaining a low profile
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,313
|
Re: G16 with Rhox 6" Lift
It should look something like this. The sway bar should be straight, or it will throw things off. This one is bent a little, not much.
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
RHOX LIFT-100 6" Lift Drop Spindle Steering Stabilizer? | Lifted Golf Carts | |||
Rhox 4" A Arm lift ...Need help | Electric Club Car | |||
RHOX 6" BMF Lift? | Electric Club Car | |||
Rhox bmf 7" a-arm lift kit, e-z-go txt | Lifted Golf Carts | |||
Jakes 6"spindle Lift Kit vs RHOX 6"BMF A-Arm Lift Kit | Lifted Golf Carts |