|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
10-07-2020, 05:18 PM | #1 |
Not Yet Wild
Join Date: Aug 2008
Posts: 9
|
Yamaha G29 lift project
Installed a Rhox 505 A-Arm kit on my G29 and the steering knuckle have two sets of holes. When on the inner hole there is not enough adjustment and tire toes out. When I use the outer holes it seems like I loose turning radius. Is this just me or is there another option?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-08-2020, 06:37 AM | #2 |
Searching for The Way
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 11,418
|
Re: Yamaha G29 lift project
Pics would be helpful.
Are there directions with the kit? Are you adjusting your tie rods to set the toe angle? You could also place a call to the supplier or Rhox to see what they say. Sometimes the manufacturer has a tech line for install help. I'm not familiar with that particular kit, but usually these kits are bolt on for the most part. |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Yamaha G29 lift project | Lifted Golf Carts | |||
Picked up my new project today Lift Kit? | Electric Club Car | |||
my 92 cc ds winter Z-lift project | Lifted Golf Carts | |||
G2 Lift Project | Lifted Golf Carts | |||
G16 12 inch lift Project | Lifted Golf Carts |