10-09-2020, 09:58 AM | #1 |
Not Yet Wild
Join Date: Mar 2012
Posts: 38
|
Crank seal
Took my cart to a reputable repair place to get crank seal replaced they called and told me it was done but old seal was still on shaft in motor and they put new seal on is this something that could turn into a problem 2006 ezgo txt their telling me it will just spin around on shaft for a long time what do u guys think
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-09-2020, 10:20 AM | #2 |
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,667
|
Re: Crank seal
reputable repair place??
|
10-09-2020, 10:25 AM | #3 |
Not Yet Wild
Join Date: Mar 2012
Posts: 38
|
Re: Crank seal
So I thought not sure what I can do if I refuse to pay they just keep the cart what do you think could happen with seal place was called tri state cart in Scranton
|
10-09-2020, 10:42 AM | #4 |
Gone Wild
Join Date: Feb 2008
Location: Brooklyn, Michigan "Home of M.I.S."
Posts: 3,667
|
Re: Crank seal
If they said it would just be spinning around on the shaft I wonder why they didn't remove it... don't make since.
|
10-09-2020, 11:04 AM | #5 |
Not Yet Wild
Join Date: Mar 2012
Posts: 38
|
Re: Crank seal
They said it be a major issue to get it out mentioned having to remover engine
|
10-09-2020, 11:24 AM | #6 |
Gone Wild
Join Date: Jul 2020
Location: NC
Posts: 774
|
Re: Crank seal
I am assuming you had an oil leak, reason for taking it in. What exactly did they do that they need to get paid for to stop the oil leak?
If I take a vehicle of any kind in and specifically ask for a specific service, and they don't provide that service, I don't pay nadda. Now if they come back and say, "hey, your seal isn't the problem, this is the problem and we fixed it", it would depend on what they were charging for the fix, but I would generally pay for the fix unless it is some ridiculous "muffler bearing" crap. Usually when I drop off, I go through with service manager/sales dude on the deal...fix it as planned, or call me before you do anything different to avoid the mess. I aint payin for anything without prior approval. Usually means getting a call. They don't want the hassle either. |
10-09-2020, 11:54 AM | #7 |
Not Yet Wild
Join Date: Mar 2012
Posts: 38
|
Re: Crank seal
Well I dropped it off,told them it was leaking oil which was obviousl told them I thought it mite be Crank seal they said they have to look it over and shop fee of $80 an hr told them I didn’t want to go overboard with it like tell me it was 9hrs he said they would call didn’t hear anything till they called saying it was ready and seal fell in motor still working on bill
|
10-09-2020, 02:33 PM | #8 |
Gone Wild
Join Date: Mar 2019
Posts: 156
|
Re: Crank seal
Im just wondering how they got the new seal on without taking the old seal off the shaft.
|
10-09-2020, 03:15 PM | #9 |
Gone Wild
Join Date: Jul 2020
Location: NC
Posts: 774
|
Re: Crank seal
Yeah, something is fishy here.
I miss understood the problem at first...thought they didn't replace the seal. Sounds like they are saying they did, and just left a piece of the old seal in place. There are three seals, one on each end of the crank shaft, and on on the end of the balance shaft. All of them have a bearing just inside the seal. There shouldn't be any room for the old seal to have been left in there, but if it did some how, and if that spring, rubber, or anything from the old seal somehow gets bound in the associated bearing, the bearing will be shot. I attached diagrams from the manual...the seals are depicted by item 8 in diagram A, and 6 and 7 in the one with the whole case. case end cover.PNG Case.PNG Something isn't adding up. |
10-09-2020, 07:55 PM | #10 |
Vintage tech
Join Date: Sep 2009
Location: South
Posts: 3,217
|
Re: Crank seal
I got to admit. I have installed rings and left those crank seals in if they felt good and was not leaking to begin with. Never had one to leak. I wouldn't recommend anyone to do this though
Like others have mentioned. I would want to know how they installed a new seal and left part of the old one still there ? There is no room with the bearings. Maybe they just left the spring from seal inside |
Tags |
bad mechanics |
|
|
Similar Threads | ||||
Thread | Forum | |||
Crank seal | Gas EZGO | |||
'79 Crank / Oil Seal | Gas Harley Davidson | |||
crank seal | Gas EZGO | |||
crank seal help?? | Gas EZGO | |||
Not just crank seal replacement on G1 | Gas Yamaha |