2008 yamaha g29 ydre

jshemp · 10-13-2022, 10:36 AM

batteries good 50.8vdc, rev. buzzer works if i wiggle 26 pin plug on mtr. controller. 3 amp fuse is good, ign sw. is good, f/r sw. is good.
I get not gnd to solenoid, i can jump solenoid to gnd and solenoid works, but with throttle pressed nothing, oh yes motor is good as well, anyone have a clue? tow sw is good too.

jshemp · 10-13-2022, 10:42 AM

might help if i back up and post problem, 08 yamaha g29 ydre solenoid will not click or cart move, cart set up a few months and now nothing, i checked all the listed above.

ojo · 10-13-2022, 11:44 AM

Bad controller ( would be typical for this model ). Replace If with an Alltrax XCT 48300/400.

Volt_Ampere · 10-13-2022, 01:41 PM

What ojo said! The Moric controller probably took a dump. They are not very robust. I went with Alltrax in both of my G29 carts. If your cart is an 08, I can almost guarantee that your stock motor needs brushes - and this can kill the controller when they start to fail. I would pull the motor, inspect / replace the brushes.

10-13-2022, 10:36 AM	#1
jshemp Not Yet Wild Join Date: Aug 2020 Posts: 2	2008 yamaha g29 ydre batteries good 50.8vdc, rev. buzzer works if i wiggle 26 pin plug on mtr. controller. 3 amp fuse is good, ign sw. is good, f/r sw. is good. I get not gnd to solenoid, i can jump solenoid to gnd and solenoid works, but with throttle pressed nothing, oh yes motor is good as well, anyone have a clue? tow sw is good too.
jshemp Not Yet Wild Join Date: Aug 2020 Posts: 2

10-13-2022, 10:42 AM	#2
jshemp Not Yet Wild Join Date: Aug 2020 Posts: 2	Re: 2008 yamaha g29 ydre might help if i back up and post problem, 08 yamaha g29 ydre solenoid will not click or cart move, cart set up a few months and now nothing, i checked all the listed above.
jshemp Not Yet Wild Join Date: Aug 2020 Posts: 2

10-13-2022, 11:44 AM	#3
ojo Gone Wild Join Date: Sep 2020 Location: Germany Posts: 1,999	Re: 2008 yamaha g29 ydre Bad controller ( would be typical for this model ). Replace If with an Alltrax XCT 48300/400.

10-13-2022, 01:41 PM	#4
Volt_Ampere Gone Wild Join Date: May 2012 Location: Rio Verde, Az Posts: 7,173	Re: 2008 yamaha g29 ydre What ojo said! The Moric controller probably took a dump. They are not very robust. I went with Alltrax in both of my G29 carts. If your cart is an 08, I can almost guarantee that your stock motor needs brushes - and this can kill the controller when they start to fail. I would pull the motor, inspect / replace the brushes.

Similar Threads
Thread	Forum
2008 Yamaha YDRE	Electric Yamaha
Newbie - Yamaha YDRE 2008	Electric Yamaha
2008 Yamaha YDRE	Electric Yamaha
2008 Yamaha YDRE sometimes will not restart	Electric Yamaha
2008 Yamaha 48 Volt Ydre	Lifted Golf Carts

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum