lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Yamaha
Electric Yamaha Electric Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



Post New Thread  Reply
 
Thread Tools Display Modes
Old 12-22-2022, 05:20 PM   #1
Billetbowtie
Not Yet Wild
 
Join Date: Feb 2022
Posts: 36
Default G19 with alltrax controller blinking 2 red

I have a older g19 with a dcx400 controller and the cart won't move. The solenoid clicks when going from tow to run and the controller will blink green and then 2 red. From what I have read it's a under temp code. I also read that if the frame is showing voltage it could cause the code. My frame is showing 22 volts so I insulated the controller to the frame. The controller still gives the same code

Any ideas? I'm not sure if the pedal switch is working or if it isn't if it will blink a different code .
Billetbowtie is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 12-22-2022, 05:45 PM   #2
ojo
Gone Wild
 
ojo's Avatar
E-Z-GO
 
Join Date: Sep 2020
Location: Germany
Posts: 1,996
Default Re: G19 with alltrax controller blinking 2 red

The DCX is a programmable controller, you could connect it to a PC/Laptop and check out what's going on?
ojo is offline   Reply With Quote
Old 12-22-2022, 05:55 PM   #3
scottyb
Happy Carting
 
scottyb's Avatar
E-Z-GO
 
Join Date: Dec 2007
Location: Southern California
Posts: 73,399
Default Re: G19 with alltrax controller blinking 2 red

Under temp error has been a fatal error code in my experience. Contact Alltrax 541-476-3565- ext 3
scottyb is offline   Reply With Quote
Old 12-22-2022, 06:49 PM   #4
Dave in VA
maintaining a low profile
 
Dave in VA's Avatar
Yamaha
 
Join Date: Oct 2009
Location: SW Virginia USA
Posts: 6,314
Default Re: G19 with alltrax controller blinking 2 red

Quote:
Originally Posted by Billetbowtie View Post
I have a older g19 with a dcx400 controller and the cart won't move. The solenoid clicks when going from tow to run and the controller will blink green and then 2 red. From what I have read it's a under temp code. I also read that if the frame is showing voltage it could cause the code. My frame is showing 22 volts so I insulated the controller to the frame. The controller still gives the same code

Any ideas? I'm not sure if the pedal switch is working or if it isn't if it will blink a different code .
This isn't right...
Dave in VA is offline   Reply With Quote
Old 12-22-2022, 09:33 PM   #5
Billetbowtie
Not Yet Wild
 
Join Date: Feb 2022
Posts: 36
Default Re: G19 with alltrax controller blinking 2 red

I agree but not sure why it shows voltage.
Billetbowtie is offline   Reply With Quote
Old 12-23-2022, 10:42 AM   #6
kgsc
Gone Wild
 
kgsc's Avatar
Mixed Breed
 
Join Date: Dec 2009
Location: Aiken, SC
Posts: 13,120
Default Re: G19 with alltrax controller blinking 2 red

Many times with a regular vom they will pick up voltage on the frame weeping from the battery case. It’s just a ghost. Under temp error pretty much is a death sentence.
kgsc is offline   Reply With Quote
Old 12-23-2022, 01:09 PM   #7
Billetbowtie
Not Yet Wild
 
Join Date: Feb 2022
Posts: 36
Default Re: G19 with alltrax controller blinking 2 red

Yay me! Might be a silly question but does anyone work on alltrax controllers. I am assuming no but I have curtis controller s fixed before.
Billetbowtie is offline   Reply With Quote
Old 12-23-2022, 01:10 PM   #8
augiedoggy
Gone Wild
 
augiedoggy's Avatar
 
Join Date: Apr 2008
Location: Western NY
Posts: 2,283
Default Re: G19 with alltrax controller blinking 2 red

Quote:
Originally Posted by Billetbowtie View Post
Yay me! Might be a silly question but does anyone work on alltrax controllers. I am assuming no but I have curtis controller s fixed before.
alltrax pots them in epoxy now for added reliability but the downside is they cannot be repaired
augiedoggy is offline   Reply With Quote
Old 12-23-2022, 06:57 PM   #9
Volt_Ampere
Gone Wild
Yamaha
 
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,165
Default Re: G19 with alltrax controller blinking 2 red

Alltrax controllers are completely potted. Have been since I got my first one 7 years ago. They can't be repaired.
Volt_Ampere is offline   Reply With Quote
Old 12-23-2022, 07:07 PM   #10
augiedoggy
Gone Wild
 
augiedoggy's Avatar
 
Join Date: Apr 2008
Location: Western NY
Posts: 2,283
Default Re: G19 with alltrax controller blinking 2 red

I have 2 alltrax controllers one is potted and one isn't. All the newer ones I've seen look to be potted in epoxy.
augiedoggy is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Electric Yamaha


Thread Tools
Display Modes


Similar Threads
Thread Forum
4 blinking lights on controller Electric golf carts
2011 BBB Sevcon controller Blinking Electric EZGO
Star Cart Controller Status Light Blinking Star and Fairplay
alltrax controler blinking Extreme DC!
08 Precedent alltrax controller blinking 5 times Electric Club Car


All times are GMT -5. The time now is 11:38 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. © 2006-2017 Buggiesgonewild.com. All rights reserved.