|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
01-27-2023, 06:06 PM | #1 |
Gone Wild
Join Date: Dec 2009
Location: Fieldon Il
Posts: 151
|
programming Alltrax spm48225
I dont know what to do, send help right away . Max motor amps, max battery amps, throttle rate and speed/torque. I need more torque than speed.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
01-28-2023, 10:01 AM | #2 |
Gone Wild
Join Date: Apr 2008
Location: Western NY
Posts: 2,296
|
Re: programming Alltrax spm48225
Hopefully these help.
https://alltraxinc.com/wp-content/up...S-MANUAL-1.pdf https://alltraxinc.com/wp-content/up...hicle-Perf.pdf https://alltraxinc.com/controller-pro-software/ essentually you want the max amps set for everything. Turn off turbo mode. When you swap out the boat batteries the controller will have more current/amps to use. you can leave the controller connected to a laptop and climb that hill in monitor mode and see what kind of current the motor is actually pulling and needs. |
01-28-2023, 10:55 AM | #3 |
Gone Wild
Join Date: Dec 2009
Location: Fieldon Il
Posts: 151
|
Re: programming Alltrax spm48225
I set the max motor amps at 200amps, max battery amps at 200amps, throttle rate at 15 and speed/torque at standard. I dont have a laptop, so I have to set this up on my desktop. Making changes will be will be a pain, so would hope these setting will be fine.
|
01-28-2023, 10:58 AM | #4 |
Gone Wild
Join Date: Dec 2009
Location: Fieldon Il
Posts: 151
|
Re: programming Alltrax spm48225
I dont see a turbo mode, is that the same as peak amp mode?
|
01-28-2023, 11:12 AM | #5 |
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,183
|
Re: programming Alltrax spm48225
There should be a "turbo mode" and there is also a street or turf mode. I use street!
|
01-28-2023, 11:19 AM | #6 |
Gone Wild
Join Date: Dec 2009
Location: Fieldon Il
Posts: 151
|
Re: programming Alltrax spm48225
Not seeing either of those for this controller.
|
01-28-2023, 11:36 AM | #7 |
Gone Wild
Join Date: Apr 2008
Location: Western NY
Posts: 2,296
|
Re: programming Alltrax spm48225
Some options are only for newer controllers you do want peak amp mode. They basically renamed some of the same features I think.
|
01-28-2023, 10:41 PM | #8 |
Gone Wild
Join Date: Dec 2009
Location: Fieldon Il
Posts: 151
|
Re: programming Alltrax spm48225
Does 15 on throttle rate sound about right, dont need to do wheel stands.
|
01-29-2023, 06:56 AM | #9 | |
Gone Wild
Join Date: Apr 2008
Location: Western NY
Posts: 2,296
|
Re: programming Alltrax spm48225
Quote:
Make sure you set the throttle type to the correct type for your cart, its a menu you have to enable to see the options. |
|
01-29-2023, 09:35 AM | #10 |
Gone Wild
Join Date: Dec 2009
Location: Fieldon Il
Posts: 151
|
Re: programming Alltrax spm48225
In throttle settings it says throttle type 0-5k 2 wire, but can not find a menu to change it.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
alltrax spm48225 | Electric EZGO | |||
Programming Alltrax | Electric Club Car | |||
Going 48 volt alltrax spm48225 | Electric EZGO | |||
Alltrax programming | Electric EZGO | |||
alltrax programming | Electric EZGO |