|
07-25-2010, 11:55 PM
|
#1 |
|
Gone Wild
Join Date: Jul 2010
Location: arkansas
Posts: 192
|
clone question.....
probably been asked before,, but im gonna ask anyway with hope i get some help,,,,, what kind of speed and torque will a 13 or 16hp clone motor put out wiht a cw tranaxle,,,,,, reverse im not worried about,,, but i want to e able to climb hills and go average speed,20 or so....
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-26-2010, 07:32 AM
|
#2 |
|
Happy Carting
 Join Date: Dec 2007
Location: Southern California
Posts: 73,399
|
Re: clone question.....
The Chinese clone engine runs at 3600 rpm so speed is about the same as stock. Hp is 13 instead of 9. That is nearly a 50% in power on paper, I think you will feel 35-40% depending upon the condition of your clutches, belt, etc.
|
|
|
|
|
07-27-2010, 10:38 AM
|
#3 |
|
Gone Wild
Join Date: Dec 2009
Location: Corpus Christi, TX
Posts: 1,644
|
Re: clone question.....
Heres is my thought on a clone swap for a CW rearend.
Are you running stock tires or taller tires? I think the gear ratio in reverse is higher so with stock tires I dont think you will get 20 or it may be right under 20, but with taller tires it will get there with lots of pulling power. |
|
|
|
|
07-27-2010, 11:04 PM
|
#4 |
|
Gone Wild
Join Date: Jul 2010
Location: arkansas
Posts: 192
|
Re: clone question.....
i will be putting a lift on with bigger tires...,,, havent decided which lift yet,,, trying to get some ideas on what i want to do,,,,
|
|
|
|
 |
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 13hp clone | Gas Club Car | |||
| clone motors.... | Electric EZGO | |||
| Fuel to a clone | Gas Club Car | |||
| Another Clone build | Big Block Talk! | |||
| clone charging?? | Big Block Talk! | |||
Linear Mode
