No Go in reverse..

The_Shocker · 03-25-2015, 08:51 PM

Hey everyone, I just installed a Curtis Series controller in a 1997 EzGo 36 volt recently removed from a 2007 EzGo Series 36 volt. Problem is, I have forward but not reverse. The removed controller from the 1997 was cross referenced from an older EzGo. Do I have a wire misplaced somewhere or what? Thanks..

kgsc · 03-25-2015, 09:04 PM

Series cart does FnR switching with a rotary switch. Does the solenoid click?

scottyb · 03-25-2015, 09:59 PM

Does the solenoid click? In both F&R ?

The_Shocker · 03-26-2015, 12:54 PM

Yes, the solenoid clicks in reverse.

The_Shocker · 03-26-2015, 12:55 PM

And yes. Forward reverse is on a rotary switch. And solenoid clicks both forward and reverse..

kgsc · 03-26-2015, 02:37 PM

In a series cart the direction is controlled by the rotary switch. If it works in forward chances are the controller is Okay. Try wiggling the FnR switch with the pedal slightly depress and solenoid engaged. If it moves you have an issue with your contacts on the rotary button or plate. A quarter turn on the big nut may fix that..

yurtle · 03-26-2015, 02:55 PM

Did it ever work right? Check the FNR to make sure the cam turns all the way to the stop. The FNR is bolted to the frame through slotted holes, so it can be adjusted if needed.

03-25-2015, 08:51 PM	#1
The_Shocker Not Yet Wild Join Date: Oct 2014 Location: NC Posts: 30	No Go in reverse.. Hey everyone, I just installed a Curtis Series controller in a 1997 EzGo 36 volt recently removed from a 2007 EzGo Series 36 volt. Problem is, I have forward but not reverse. The removed controller from the 1997 was cross referenced from an older EzGo. Do I have a wire misplaced somewhere or what? Thanks..

03-25-2015, 09:04 PM	#2
kgsc Gone Wild Join Date: Dec 2009 Location: Aiken, SC Posts: 13,123	Re: No Go in reverse.. Series cart does FnR switching with a rotary switch. Does the solenoid click?

03-25-2015, 09:59 PM	#3
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,401	Re: No Go in reverse.. Does the solenoid click? In both F&R ?

03-26-2015, 12:54 PM	#4
The_Shocker Not Yet Wild Join Date: Oct 2014 Location: NC Posts: 30	Re: No Go in reverse.. Yes, the solenoid clicks in reverse.

03-26-2015, 12:55 PM	#5
The_Shocker Not Yet Wild Join Date: Oct 2014 Location: NC Posts: 30	Re: No Go in reverse.. And yes. Forward reverse is on a rotary switch. And solenoid clicks both forward and reverse..

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

03-26-2015, 02:37 PM	#6
kgsc Gone Wild Join Date: Dec 2009 Location: Aiken, SC Posts: 13,123	Re: No Go in reverse.. In a series cart the direction is controlled by the rotary switch. If it works in forward chances are the controller is Okay. Try wiggling the FnR switch with the pedal slightly depress and solenoid engaged. If it moves you have an issue with your contacts on the rotary button or plate. A quarter turn on the big nut may fix that..

03-26-2015, 02:55 PM	#7
yurtle Gone Mad Join Date: Oct 2009 Location: Buford, GA Posts: 8,988	Re: No Go in reverse.. Did it ever work right? Check the FNR to make sure the cam turns all the way to the stop. The FNR is bolted to the frame through slotted holes, so it can be adjusted if needed.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Forum
wiring a reverse light to the reverse buzzer?	Gas Yamaha
No reverse. HD forward reverse switch needed?	Electric Club Car
Goes in reverse when switch is in forward. does nothing with swicth in reverse	Electric EZGO
Reverse won't go but if I pump gas it slams into reverse	Electric Club Car
Reverse alarm stuck - motor won't run forward or reverse	Electric EZGO