|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
08-24-2015, 05:13 PM
|
#1 |
|
Not Yet Wild
Join Date: Sep 2014
Posts: 2
|
2010 RXV Madjax Voltage Reducer Switched Output
I have a Madjax voltage reducer that I installed but I don't know where to wire the green wire to the 36/48 volt switched input from keyswitch.
When I looked at the keyswitch, it just had a wiring harness, and I didn't want to cut any wires. Is there somewhere I can wire the switched input near the battery box? |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-24-2015, 07:21 PM
|
#2 | |
|
Gone Wild
Join Date: Aug 2014
Location: Duncan Corners
Posts: 905
|
Re: 2010 RXV Madjax Voltage Reducer Switched Output
Quote:
You can run a hot wire (fused) from battery positive through switch on dash to reducer enable. You can also hook reducer to switched power lug of solenoid. More help available if needed. Again, DO NOT attempt to wire to keyswitch. |
|
|
|
|
|
08-25-2015, 01:47 AM
|
#3 |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: 2010 RXV Madjax Voltage Reducer Switched Output
He knows what to do, do it right & dont buy a new controller ($$ conversion). Just wire it to the large switched terminal on the solenoid. (i really gotta get a pic of the system with both solenoids, old solenoid is hard to find).
|
|
|
|
|
08-25-2015, 09:29 AM
|
#4 |
|
Not Yet Wild
Join Date: Sep 2014
Posts: 2
|
Re: 2010 RXV Madjax Voltage Reducer Switched Output
Thanks HiTechRedNeck and cgtech for the great advice! Where is the solenoid and does anyone have a picture of it and the terminal i would hook up to?
Thanks again |
|
|
|
|
08-25-2015, 03:10 PM
|
#5 |
|
Gone Wild
 Join Date: Aug 2012
Location: Houma, Louisiana
Posts: 950
|
Re: 2010 RXV Madjax Voltage Reducer Switched Output
I too would like to see a picture of the correct terminal. I am attaching a voltage meter and would like it switched.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Where to mount voltage reducer on 2010 Precedent? | Electric Club Car | |||
| Switched radio, constant memory with reducer | Electric Club Car | |||
| Where to install ScottyB voltage reducer on 2010 Precedent | Electric Club Car | |||
| MadJax 48v - 12v reducer locations | Electric Club Car | |||
| 2010 Electric RXV (Voltage Reducer) | Electric EZGO | |||
Linear Mode
