|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
08-28-2015, 02:03 PM
|
#1 |
|
Not Yet Wild
Join Date: Aug 2015
Posts: 14
|
G1 butterfly valve linkage
Has anyone found or made the butterfly linkage for the G1? The one rod I am looking to make for find is the one from the carburator to linkage arm. Looking forward to your replies. Thanks
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
08-28-2015, 03:03 PM
|
#2 |
|
Gone Wild
Join Date: Oct 2010
Location: Pittsburgh Pa
Posts: 1,551
|
Re: G1 butterfly valve linkage
When I bought my first G1 someone had made a repair to mine using a thin piece of thread all. Worked perfect.
|
|
|
|
|
08-29-2015, 07:50 PM
|
#3 |
|
Vegas modded 420
 Join Date: Jun 2009
Location: West MI
Posts: 15,443
|
Re: G1 butterfly valve linkage
Seems like you could bend one up out of thin rod. If you can get the right size its easy to run a die on the end and thread it. Seems like you could find a used one given the large number of G1 out there, but I don't know where off hand. It does not serve much of a purpose, they later eliminated them. If tuned perfectly it will work, I experimented with them, but didn't see much effect and rarely were they tuned properly on the 60 carts I played with. It was slightly quieter at part throttle.
|
|
|
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Butterfly linkage ball | Gas Yamaha | |||
| Need a butterfly out of 95 DS carb | Gas Club Car | |||
| carb butterfly gone | Gas Club Car | |||
| Exhaust valve linkage? | Gas Yamaha | |||
| Need Carb Part - Butterfly valve control | Gas EZGO | |||
Linear Mode
