|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
06-04-2016, 08:03 AM | #1 |
Just Gone
Join Date: Sep 2015
Location: North Carolina
Posts: 3,549
|
Wiring led light switch
Has anyone wired one of these led switches ?
It has an illuminated lower led when the key is on, then a upper led illuminates once you turn the switch to the on position to power lights. I have the switch wired to control my exterior lights, but can't seem to get the lower and upper leds on the switch to illuminate at all. Also, I have all 3 switches daisy chained. All control their respected exterior light, but none illuminate their led indicators. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-04-2016, 08:26 AM | #2 |
Just Gone
Join Date: Sep 2015
Location: North Carolina
Posts: 3,549
|
Re: Wiring led light switch
Link to the switch since the 1st one didn't work.
|
06-04-2016, 08:47 AM | #3 |
Gone Wild
Join Date: Jun 2014
Location: Sunset Bay, TN
Posts: 2,390
|
Re: Wiring led light switch
Are they being fed the correct voltage? Looks like the range is from 12 to 24 VDC and may not work at higher voltage.
Generally when an LED does not work the +/- polarity is backwards... |
06-04-2016, 09:25 AM | #4 |
Gone Wild
Join Date: Sep 2012
Location: Charlotte, NC
Posts: 9,329
|
Re: Wiring led light switch
This is the connection diagram for that switch:
http://www.buggiesgonewild.com/attac...tch_wiring.jpgFrom the picture it looks like the daisy chain on the Negative side, is not connected to a negative source. |
06-04-2016, 04:07 PM | #5 |
Just Gone
Join Date: Sep 2015
Location: North Carolina
Posts: 3,549
|
Re: Wiring led light switch
The negative chain starts right to left from a bus bar. Incoming constant power (w/ key on) starts left to right. Then output to relay is the bottom left of each switch. Scratching my head on this one. Been playing around with them for a couple of days and about ready to give up on the blue led indicators.
|
06-04-2016, 04:07 PM | #6 |
Just Gone
Join Date: Sep 2015
Location: North Carolina
Posts: 3,549
|
Re: Wiring led light switch
|
06-04-2016, 05:18 PM | #7 |
Gone Wild
Join Date: Jun 2014
Location: Sunset Bay, TN
Posts: 2,390
|
Re: Wiring led light switch
|
06-04-2016, 09:20 PM | #8 |
Gone Wild
Join Date: Jun 2014
Location: Green Valley, Az
Posts: 678
|
Re: Wiring led light switch
What Sergio pointed out was the switches a linked together properly but there is not a visible negative connection going to the linked switches from the voltage reducer...at least you can't see one in the posted picture...take a temporary jumper from the negative wire from the reducer and clamp it to any negative and you should see the lights work.
|
06-06-2016, 10:50 PM | #9 |
Just Gone
Join Date: Sep 2015
Location: North Carolina
Posts: 3,549
|
Re: Wiring led light switch
Got it fixed tonight
Faulty relay from the 1st switch in the series. Replaced it with another 40amp one and everything works as it should. And yes, before anyone says anything, it's on the charger at this very moment (Sorry about the sideways pic) |
|
|
Similar Threads | ||||
Thread | Forum | |||
wiring multiple LED light strips to 1 switch | Electric EZGO | |||
Replace light switch with 3-position key switch | Electric EZGO | |||
push pull light switch wiring | Electric Club Car | |||
club car head light and tail light wiring | Electric Club Car | |||
Wiring help? New light switch | Electric Club Car |