|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
11-14-2016, 11:32 PM | #1 |
Not Yet Wild
Join Date: Jul 2016
Posts: 67
|
G2 ignitor wiring connector needed
I need the connector shown here. The wires broke off inside the connector... and I have no way to repair it. I either need a new connector, new harness, or new pins to install in the connector. Any helpful ideas? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
11-17-2016, 10:11 PM | #2 |
Not Yet Wild
Join Date: Jul 2016
Posts: 67
|
No one?
|
11-18-2016, 07:09 AM | #3 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: G2 ignitor wiring connector needed
What makes yours unrepairable? But no, I don't have an extra.
|
11-21-2016, 10:02 AM | #4 |
Not Yet Wild
Join Date: Jul 2016
Posts: 67
|
The wiring broke off of the back of the connector.
I could take the pin out of the connector, and attempt to locate a new pin, and attach the wire to it. Any idea where I can find the pins? Or where to find the connector? They look fairly universal but I can't find any markings on them. |
|
|
Similar Threads | ||||
Thread | Forum | |||
G2 Ignitor Unit needed | Gas Yamaha | |||
Troubleshoot Ignitor Wiring Harness before and after the connector G9 | Gas Yamaha | |||
G2 Ignitor connector | Gas Yamaha | |||
Curtis PMC Connector PN#s needed | Electric EZGO | |||
Part needed IGNITOR, YAMAHA G2 | Golf Carts and Parts |