FSIP speed motor upgrade question

[Gregorio]

Originally Posted by scottyb

Gawd, I have to hike my pricing!?

NOOO!!!! I'm not done with this cart, yet! I still need a motor. The stock AMD is a lot sturdier than I expected. Might have to turn up the settings a bit more

[scottyb]

What? sell it, don't kill it on purpose.

[Gregorio]

Originally Posted by scottyb

What? sell it, don't kill it on purpose.

If it suddenly stops running, the wife will want it fixed

Maybe I can "simulate" a motor failure

[scottyb]

The hard part will be igniting the match book under the seat while she's driving

[mgray70]

Originally Posted by scottyb

On my 2014 Prec I upgraded in this progression:
1. dealer speed code 4 = 19.mph
2. FSIP A3 high speed motor = same 19 mph (controller limit)
3. XCT48300 (smallest controller yet 135 peak amps higher) = 27 mph

Scotty, just placed the order. Like I said earlier the owner is wanting around 25 mph. This is a street cart, lifted with 23"tires, pretty much flat roads, no need for a lot of regen. Whatever you can program to help achieve would be greatly appreciated. Thanks!

Sent from my SM-G930R4 using Tapatalk

[scottyb]

Originally Posted by mgray70

Scotty, just placed the order. Like I said earlier the owner is wanting around 25 mph. This is a street cart, lifted with 23"tires, pretty much flat roads, no need for a lot of regen. Whatever you can program to help achieve would be greatly appreciated. Thanks!

Sent from my SM-G930R4 using Tapatalk

Okay, Roger that.

[Raystar57]

Originally Posted by scottyb

On my 2014 Prec I upgraded in this progression:
1. dealer speed code 4 = 19.mph
2. FSIP A3 high speed motor = same 19 mph (controller limit)
3. XCT48300 (smallest controller yet 135 peak amps higher) = 27 mph

Wow, yes that is looking real sweet.

[scottyb]

Originally Posted by Raystar57

Wow, yes that is looking real sweet.

The FSIP motor is designed to run with the stock controller but, the stock controller limits motor rpm (speed) to 19 mph regardless of the motor make or size. The Alltrax XCT48300 controller allows the user to set the rpm limit & a peak output which is 60% greater than the stock controller. I set up the test cart controller with the motor manufactures suggested 6000 rpm limit. I was surprised at how much more power the cart had with this combo. It rapidly reached 27.5 mph on stock tires and wheels. 20" tall tires would result in 30mph.

[Golf cart guy]

If I replace a stock motor with a Upgraded EMP, FSIP, Plum Quick motor, a CC IQ car will go 24 MPH with no other changes. If it has no code 4 in it, it will go from 15 to 24 MPH. If it has a code 4 in it, it will go 24 MPH with no other changes. Ive done hundreds.
I realize your cart has big tires, so you will need to gain back some torque, and a controller change will be required.

[scottyb]

I just did this, the FSIP motor did not increase speed in the Precedent beyond 19mph.
The controller limited the motor rpm. The speed remained at 19 mph with the OEM controller set on code 4.
Code 4 goes 19mph. Both Ezgo and CC limit maximum speed to 19mph.
Call the dealer to verify.
With the Alltrax alone I can get 23mph from these carts. These are real GPS results.
You may be seeing modified speed sensor results.