Wiring my light kit...ground wire?

[Sergio]

Originally Posted by shealey

Is this picture enough to determine that the black wire is the necessary ground, or do I need to trace it all the way back?

That black wire enters the loom on the correct location so it is most likely the correct wire.

It does not make any sense why it was connected that way unless it was by accident since it could not possibly have any beneficial function.

By the way, were the battery hold-downs removed for your first picture or are they missing?

[shealey]

Thanks guys...

Battery hold downs?...there are supposed to be battery hold downs???

They must have been removed prior to me buying. Any issues you see not having them?

[Gregorio]

Originally Posted by shealey

Thanks guys...

Battery hold downs?...there are supposed to be battery hold downs???

They must have been removed prior to me buying. Any issues you see not having them?

Yep! Tip that thing on its side and you will be awash in battery acid. Good bumps can toss them around causing a short or worse.

PM me if you need a set. I just replaced my FLA pack with Lithium and don't need them anymore.

[Sergio]

Yep, like Gregorio said, each hold-down keeps 3 batteries in place:

[Raystar57]

This is one reason why you need battery hold-downs.
This is a gasser but it applies to electrics.

https://www.youtube.com/watch?v=8KIt-s-oOf8

[shealey]

At 1:30 AM last night, there were lights!!!

Thanks to all that helped.

[Gregorio]

Originally Posted by shealey

At 1:30 AM last night, there were lights!!!

That, right there is a sure sign of addiction. 1:30AM Friday night and you are working on your cart! Congratulations and welcome to the club!

Keep an eye on the OBC/Charger and your pack voltage. That was really strange how that wire was hooked up.