|
Gas Club Car Gas DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
09-07-2017, 08:36 PM | #1 |
Not Yet Wild
Join Date: Feb 2017
Posts: 5
|
Swapping a few 290 motor with a larger motor like a 400
Has anyone swapped for a larger motor on a club car ds if so what needs to be done
Sent from my LGLS775 using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-08-2017, 11:47 AM | #2 |
Gone Wild
Join Date: Jun 2016
Posts: 623
|
Re: Swapping a few 290 motor with a larger motor like a 400
Look in the Clone or Big Block section.
|
09-09-2017, 05:27 AM | #3 |
What the ....?
Join Date: Jan 2007
Location: N.E. Wisconsin
Posts: 14,931
|
Re: Swapping a few 290 motor with a larger motor like a 400
An FE290 to an FE400 should be a direct swap as long as you have a complete 400,
BUT... if your talking about your 94, it has a counterclockwise transaxle, and it may be VERY difficult to locate a counterclockwise FE400! so, I'll agree with HBR... your 94 would be a good candidate for a clone, or a big block! .02 |
09-10-2017, 05:50 AM | #4 |
Gone Wild
Join Date: Jul 2012
Location: Central Florida
Posts: 409
|
Re: Swapping a few 290 motor with a larger motor like a 400
94 is the good rear. The backwards stuff started in 97.
|
09-13-2017, 06:43 PM | #5 |
Getting Wild
Join Date: Oct 2015
Location: Baden,Pennsylvania
Posts: 77
|
Re: Swapping a few 290 motor with a larger motor like a 400
Do the big block kit from Vegas Carts it's your best easiest to install option.
https://imgur.com/a/OvifX |
02-18-2018, 08:52 PM | #6 |
Not Yet Wild
Join Date: May 2017
Posts: 5
|
Re: Swapping a few 290 motor with a larger motor like a 400
Chris - I have a 94 DS setup like yours and thinking about doing the Vegas 460 and HD clutch?How do you like it? How is the low and top end? I have the 290 now so anything would be an improvement but really like the ease of the install and reviews on the VC engines/clutches.
|
02-18-2018, 10:57 PM | #7 |
Gone Wild
Join Date: Dec 2009
Location: Corpus Christi, TX
Posts: 1,644
|
Re: Swapping a few 290 motor with a larger motor like a 400
Tas, do the 625 engine
|
02-19-2018, 03:14 PM | #8 |
Not Yet Wild
Join Date: Feb 2018
Location: Spokane WA
Posts: 6
|
Re: Swapping a few 290 motor with a larger motor like a 400
I just put in the VC 625 from a 290. The swap is super easy plus you get everything you need including the clutches. It fired right and it rips. I feel it was a excellent value.
|
02-22-2018, 12:44 PM | #9 |
Not Yet Wild
Join Date: May 2017
Posts: 5
|
Re: Swapping a few 290 motor with a larger motor like a 400
Wow.. Did not even see that option. The same price so no brainer. I performed the zip tie trick and it rolls at 23mph with pedal left. I am running 23" tires with the jacks a-arm 6" and HD rear springs. Setup is solid and now I have the speed I want. Will probably wait a bit on the 625, but will def do it sometime this year. Thanks Guys!
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Anyone run larger tires on a g19 w stock motor | Electric Yamaha | |||
Swapping out (upgrading) an EZ-GO Electric Motor | Electric EZGO | |||
1978 Harley Motor swap to a CRF 450cc motor. pics inside.. gearing help???/ | Gas Harley Davidson | |||
swapping 250sx motor into 1989 ezgo - need advise | Bike & ATV Engine Swaps | |||
Swapping a shunt wound motor into a 1988 Marathon | Electric EZGO |