2007 ST350 won't fire

[Mrjonman]

Originally Posted by Spicyunicorn

Set valve lash to .004 there's a thread on here how to do it http://www.buggiesgonewild.com/ezgo-...djustment.html

Thank you

Will be back by the house this afternoon and give this a go

[Cartmaster]

Originally Posted by Spicyunicorn

Set valve lash to .004 there's a thread on here how to do it http://www.buggiesgonewild.com/ezgo-...djustment.html

That's the link I was going to send you once home!
To use a British saying "pipped at the post" lol

Ignore the arguments regarding doing the adjustments hot or cold. Do it with the engine cold as it states in the Robin engine manual.

[Mrjonman]

Well some of the valves appear to be in need of adjustment

However, I am on able to turn a cam by spinning the drive clutch by hand, so does this mean my drive clutch is A goner?

[Mrjonman]

When attempting to start it, it makes a clicking noise but then that stops, I assume that is the drive clutch not catching

When trying it with valve cover off the cam just kind of twitches but never actually turns

[Spicyunicorn]

Sounds line you have a broken cam belt

[Spicyunicorn]

Pull the black cover off on the clutch side if motor there is a cogged belt in there if it's broke you need to time the cam when you go back together

[Mrjonman]

I feel like I like this better than a busted clutch

[Mrjonman]

Originally Posted by Spicyunicorn

Pull the black cover off on the clutch side if motor there is a cogged belt in there if it's broke you need to time the cam when you go back together

Couldn't easily get the bottom bolt of the cover off but was about to open it enough by taking out top 2 bolts to remove the snapped belt.

Time to order one

And to time it do I just simply follow the instructions in the service manual?

[Spicyunicorn]

Yup should be the same picture as I posted it's pretty simple

[Mrjonman]

Originally Posted by Spicyunicorn

Yup should be the same picture as I posted it's pretty simple

Awesome appreciate it.

Amazon Primed the belt so should be here by Thursday.

Hopefully that and valve adjustment and it'll fire