|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-02-2010, 03:48 PM | #1 |
Not Yet Wild
Join Date: May 2010
Location: Concord, North Carolina
Posts: 5
|
Carb rebuild help for EH29C Robin Engine
I am working on my father in laws EZ Go Golf cart. It will start but only after holding the gas pedal down for about two minutes. I have replaced the spark plugs. Once it starts it runs well but if stop for a few minutes and try to start it again it is difficult to start again. Assuming it may be carb problem. Any other ideas on what to check is appreciated. Gas forms in the air cleaner so I am assuming it is the carb.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-02-2010, 04:06 PM | #2 |
Not Yet Wild
Join Date: May 2010
Posts: 1
|
Re: Carb rebuild help for EH29C Robin Engine
Did you get an answer to your question, we are having the same problem
|
05-02-2010, 04:46 PM | #3 |
Not Yet Wild
Join Date: May 2010
Posts: 2
|
Re: Carb rebuild help for EH29C Robin Engine
Mine was doing same thing(not starting or very hard to start,spitting fuel into air box), after checking all electric things came down to carb. So I started searching and found a few things. After reading a few things I decided to try a valve adjustments(GREAT thread on here somewhere with instructions) I followed the thread on here, and did it Friday and has ran without the problems ever since. HTH
|
05-02-2010, 06:51 PM | #4 |
Gone Wild
Join Date: Jul 2008
Location: Reddick IL
Posts: 11,220
|
Re: Carb rebuild help for EH29C Robin Engine
That is a great post Dogginit and welcome to BGW
all three of you. The basics are first, spark, fuel and compression. The valves must be in lash or you lose compression. Let us know how it goes for you 9450 and 7762. |
05-08-2010, 06:46 PM | #5 |
Not Yet Wild
Join Date: May 2010
Location: Concord, North Carolina
Posts: 5
|
Re: Carb rebuild help for EH29C Robin Engine
I need to look at the clearance for the valves. Sounds like that may be the problem based on one of the responses I received.
|
11-10-2011, 10:09 PM | #6 |
Not Yet Wild
Join Date: Nov 2011
Posts: 12
|
Re: Carb rebuild help for EH29C Robin Engine
i am having the same problem right now!!! try choking alittle and i bet it will start right up..so far i have found it to be a low sprk. problem on one cylinder... we tried the fuel pump.. carb... new plugs coil.. and none of that fixed it..
Im leaning torwards the ignitor. be will know more tomorrow |
|
|
Similar Threads | ||||
Thread | Forum | |||
EH29C Robin Engine Rod Caps | Gas EZGO | |||
Robin EH29C carb setting | Gas EZGO | |||
Robin eh29c 295cc | Gas EZGO | |||
Robin eh29c | Gas EZGO | |||
Smoking EH29C Robin | Gas EZGO |