04-26-2011, 03:38 PM | #1 |
Not Yet Wild
Join Date: Apr 2011
Location: Florenc,sc
Posts: 17
|
clutch puling problem
hi guys,
have an 87 ezgo gas cart, 244cc, 2cycle. need to pull clutch. there is a set screw just behind the drive belt pulley. looks like its holding 2 sleeves together. does this have to be removed before pulling the clutch? thanks in advance. have learned a lot from this forum. woodyoda |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-29-2011, 09:44 PM | #2 |
Not Yet Wild
Join Date: Apr 2011
Location: Florenc,sc
Posts: 17
|
Re: clutch puling problem
solved problem with pulling clutch. just wasn't using enough pressure to get clutch to pop off shaft. set screw has nothing to do with pulling clutch. hope this will help someone down the road.
woodyoda |
04-30-2011, 07:07 AM | #3 |
Respect the Cart
Join Date: May 2010
Location: Rocky Mount, Virginia
Posts: 2,190
|
Re: clutch puling problem
Sorry that no one jumped in to answer your question, that is most unusual. Still you got it sorted, well done.
Dave |
|
|
Similar Threads | ||||
Thread | Forum | |||
Clutch problem | Gas Yamaha | |||
G1 Clutch problem? | Gas Yamaha | |||
clutch problem | Gas EZGO | |||
Clutch problem????? | Gas EZGO | |||
Clutch Problem | Gas EZGO |