Looking for 6:1 gears

CutlerBaysFinesT · 06-12-2013, 04:34 PM

I want 6:1 gears anyone have them for sale or know where I can get them. Can't find them on eBay. They have 8:1. But I can get an extra 13 mph with the 6:1. Thanks!
2007 gas yamaha g29
"The drive" 😉

cgtech · 06-13-2013, 03:02 PM

There are none, nor will there be any. if you could see the stock ring gear in compairison to the 8:1 ring gear you would quickly see the problem. the 8:1 ring gear is only about 1/4 inch thick. the carrier (where the ring gear bolts on) is too large to fit any smaller gear diameter, so a 6:1 gear would also require a different carrier to bolt it to. it would be too expensive, so i doubt anyone will ever build it. Sorry.....this post only applies to the TEAM axle found in Drives, the older Dana axle could fit 6:1 gears. Parts do Not interchange between TEAM and DANA axles.

CutlerBaysFinesT · 06-13-2013, 09:09 PM

Tks I researched it after i made the post.. Anyone know about using this power kit. It looks like a stiffer clutch spring. Any thoughts. Thanks

cgtech · 06-15-2013, 07:12 PM

call erlandson technologies, they are Very thorough, and will have anything you may need

06-12-2013, 04:34 PM	#1
CutlerBaysFinesT Not Yet Wild Join Date: Nov 2011 Posts: 25	Looking for 6:1 gears I want 6:1 gears anyone have them for sale or know where I can get them. Can't find them on eBay. They have 8:1. But I can get an extra 13 mph with the 6:1. Thanks! 2007 gas yamaha g29 "The drive" 😉

06-13-2013, 03:02 PM	#2
cgtech Over This Interview Is... Join Date: Jun 2012 Location: AZ Posts: 17,449	Re: Looking for 6:1 gears There are none, nor will there be any. if you could see the stock ring gear in compairison to the 8:1 ring gear you would quickly see the problem. the 8:1 ring gear is only about 1/4 inch thick. the carrier (where the ring gear bolts on) is too large to fit any smaller gear diameter, so a 6:1 gear would also require a different carrier to bolt it to. it would be too expensive, so i doubt anyone will ever build it. Sorry.....this post only applies to the TEAM axle found in Drives, the older Dana axle could fit 6:1 gears. Parts do Not interchange between TEAM and DANA axles.

06-13-2013, 09:09 PM	#3
CutlerBaysFinesT Not Yet Wild Join Date: Nov 2011 Posts: 25	Re: Looking for 6:1 gears Tks I researched it after i made the post.. Anyone know about using this power kit. It looks like a stiffer clutch spring. Any thoughts. Thanks

06-15-2013, 07:12 PM	#4
cgtech Over This Interview Is... Join Date: Jun 2012 Location: AZ Posts: 17,449	Re: Looking for 6:1 gears call erlandson technologies, they are Very thorough, and will have anything you may need

Similar Threads
Thread	Forum
low gears	Electric EZGO
gears	Electric EZGO
low gears & high revs or stock gears big torque?	Extreme DC!
How do i tell if i have 8:1 gears	Gas Yamaha
gears?	Big Block Talk!

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum