|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
06-19-2013, 11:42 AM
|
#1 |
|
Not Yet Wild
Join Date: Aug 2011
Location: Duluth, MN
Posts: 58
|
G1 front lift question
OK, so I've searched the forum for hours and found several pics of how people have made plates to lift the front of their G1 a few inches.
My question is what are you doing with the steering mechanism? I haven't found any info as to whether that needs to be lengthened as well. Thanks!! |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-19-2013, 01:17 PM
|
#2 |
|
Getting Wild
Join Date: Mar 2009
Posts: 88
|
Re: G1 front lift question
I am kind of in the same boat I am having the plates all cut for the 4" front lift but I am not real sure on how I am going to raise the tie rod ends I am not sure if I am going to make some with angle plate or switch to heim joints and use bolts and tube spacers like 2" at wheel and 2" at gearbox.
|
|
|
|
|
06-19-2013, 03:35 PM
|
#3 |
|
Gone Wild
Join Date: Nov 2011
Posts: 232
|
Re: G1 front lift question
I've seen some where they cut the steering arm off the bottom of the spindle & weld it back on the top . Hope this helps.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Another EzGo ST480 front lift question. Need help asap | Gas EZGO | |||
| Workhorse Front Lift Question? | Gas EZGO | |||
| front lift | Golf Carts and Parts | |||
| G9 Front End Lift Question | Gas Yamaha | |||
| Jake's lift front end question from Newbie, Steering | Gas EZGO | |||
Linear Mode
