Drive belt recommendations?

esizemo · 04-28-2017, 10:45 AM

I will be purchasing a replacement drive belt for my g16a. I have found 3 that I will chose from , OEM Yamaha, Gates, Dayco. Looking for facts or opinions on one vs another.

yamarancher · 04-28-2017, 03:08 PM

Plowman's have good belts ! Just call Don.

Dave in VA · 04-28-2017, 03:10 PM

The OEM belt works well in "normal" situations. J55-G6241-01, I believe. I'd stay away from the others. For a heavier duty/performance belt, check out Plowmans. Good stuff there...

http://www.plowmanscarts.com/parts_g_16_g_22.html

LimitedEdition · 04-28-2017, 03:24 PM

I have a 2011 G29 drive that after upgrading to the new JW8 clutches I also had to go to the J55 belt. After trying after market drive belts (junk) and even OEM belts I have gotten good results out of the Gates (24G3884) Drive Belt from Amazon. The Gates belt is Kevlar reinforced and with 23" tires, clutch and carb mods it is holding up.

Tom's Toy · 04-28-2017, 04:37 PM

Just got a belt from Plowmans for a G1 looks like a better made one then was on it. You also know it will fit. Ordered it on a Monday got it Thursday.

HBR · 04-28-2017, 07:25 PM

I really like the HD dual cog belts from CPP.

maxim1157 · 04-28-2017, 07:59 PM

I bought a double cog kevlar belt from Gboost in Wisconsin.. they specialize in after market clutches.

HBR · 04-29-2017, 06:53 AM

I believe that is the brand/type CPP sells.

sho305 · 04-29-2017, 06:41 PM

Quote:

Originally Posted by maxim1157

I bought a double cog kevlar belt from Gboost in Wisconsin.. they specialize in after market clutches.

Quote:

Originally Posted by HBR

I believe that is the brand/type CPP sells.

Yes and yes, I have one too. Really cool belt, very flexible supposed to be more efficient, cogged top and bottom, holds up really well on my clone. It is slightly wider so its nice for worn clutches, just fits on newer clutches. I had to take mine off right now with my brand new clutch but I can't move my clone back anymore it will hit the trans, so it may be fine on a stock cart I don't know. It was fine on my G9 clutch but the 94c closes tighter and its just a tiny bit too much it wont engage right. And the 94c is picky about that and has no adjustment. At speed its fine. I was a little bent I like that belt a lot. So now running a stock size and style GC gboost belt and it works fine, only cogged inside as usual. With some miles on my clutch it may work again I will try it later. I mounted the clone same measure at clutches as stock but it may not be exact. I would highly recommend this belt, its really a utv belt more or less and better than normal ones.

jdavila99999 · 07-06-2017, 12:46 PM

What shop is CPP?

Sent from my iPhone using Tapatalk

04-28-2017, 10:45 AM	#1
esizemo Not Yet Wild Join Date: Jul 2013 Posts: 26	Drive belt recommendations? I will be purchasing a replacement drive belt for my g16a. I have found 3 that I will chose from , OEM Yamaha, Gates, Dayco. Looking for facts or opinions on one vs another.
esizemo Not Yet Wild Join Date: Jul 2013 Posts: 26

04-28-2017, 03:08 PM	#2
yamarancher Gone Wild Join Date: Nov 2011 Posts: 232	Re: Drive belt recommendations? Plowman's have good belts ! Just call Don.
yamarancher Gone Wild Join Date: Nov 2011 Posts: 232

04-28-2017, 03:10 PM	#3
Dave in VA maintaining a low profile Join Date: Oct 2009 Location: SW Virginia USA Posts: 6,314	Re: Drive belt recommendations? The OEM belt works well in "normal" situations. J55-G6241-01, I believe. I'd stay away from the others. For a heavier duty/performance belt, check out Plowmans. Good stuff there... http://www.plowmanscarts.com/parts_g_16_g_22.html

04-28-2017, 03:24 PM	#4
LimitedEdition Gone Wild Join Date: Aug 2014 Location: Texas Posts: 250	Re: Drive belt recommendations? I have a 2011 G29 drive that after upgrading to the new JW8 clutches I also had to go to the J55 belt. After trying after market drive belts (junk) and even OEM belts I have gotten good results out of the Gates (24G3884) Drive Belt from Amazon. The Gates belt is Kevlar reinforced and with 23" tires, clutch and carb mods it is holding up.

04-28-2017, 04:37 PM	#5
Tom's Toy Not Yet Wild Join Date: Mar 2017 Location: North Missouri Posts: 44	Re: Drive belt recommendations? Just got a belt from Plowmans for a G1 looks like a better made one then was on it. You also know it will fit. Ordered it on a Monday got it Thursday.

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

04-28-2017, 07:25 PM	#6
HBR Gone Wild Join Date: Jun 2016 Posts: 623	Re: Drive belt recommendations? I really like the HD dual cog belts from CPP.
HBR Gone Wild Join Date: Jun 2016 Posts: 623

04-28-2017, 07:59 PM	#7
maxim1157 Gone Wild Join Date: Jul 2016 Location: West Salem, Ohio Posts: 511	Re: Drive belt recommendations? I bought a double cog kevlar belt from Gboost in Wisconsin.. they specialize in after market clutches.

04-29-2017, 06:53 AM	#8
HBR Gone Wild Join Date: Jun 2016 Posts: 623	Re: Drive belt recommendations? I believe that is the brand/type CPP sells.
HBR Gone Wild Join Date: Jun 2016 Posts: 623

07-06-2017, 12:46 PM	#10
jdavila99999 Gone Wild Join Date: Jan 2012 Location: Houston Posts: 257	Re: Drive belt recommendations? What shop is CPP? Sent from my iPhone using Tapatalk

Similar Threads
Thread	Forum
2008 Drive Motor Recommendations	Electric Yamaha
Drive belt tension/belt burning	Clone Engine Swaps
?? How To: Change the Drive Belt & Starter Belt	Gas EZGO
JW1 Drive Belt & J55 Drive Belt Dimensions?	Gas Yamaha
How do I change the drive belt and altenator belt?	Gas Club Car